LPA1 antagonist 1 |
رقم الكتالوجGC31958 |
مضاد LPA1 1 هو مضاد لمستقبل حمض الليزوفوسفاتيد 1 (LPA1) انتقائي للغاية مع IC50 من 25 نانومتر.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1396006-71-5
Sample solution is provided at 25 µL, 10mM.
LPA1 antagonist 1 is a highly selective Lysophosphatidic Acid receptor-1 (LPA1) antagonist with an IC50 of 25 nM.
LPA1 antagonist 1 (compound 2) displays very potent and highly selective inhibitory activity toward LPA1, with little inhibition on LPA3 even at very high concentrations. To our knowledge, LPA1 antagonist 1 is the most selective nonlipid LPA1 antagonist so far reported. It appears that compounds (e.g., LPA1 antagonist 1) from the N-aryltriazole chemical class are much more selective for LPA1 than compounds from the corresponding pyrazole series. In comparison with Ki16425 and AM095, LPA1 antagonist 1 shows much improved antiproliferative activity. LPA1 antagonist 1 demonstrates the highest LPA1 selectivity and attenuated LPA-induced NHLF proliferation and contraction with high potency[1].
Oral dosing of LPA1 antagonist 1 in mice causes a dose-dependent reduction in serum histamine levels induced following intravenous LPA stimulation. When mice are orally dosed with LPA1 antagonist 1 (100 mg/kg, aqueous suspension) prior to intravenous LPA injection, the LPA-induced histamine level is significantly blocked A clear PK/PD relationship is demonstrated by the correlation between the levels of LPA1 antagonist 1 and LPA-induced histamine concentrations in plasma. Although AM095 almost completely blocks histamine release (100 mg/kg), analysis of plasma samples revealed more than 65-fold higher concentrations of AM095 than LPA1 antagonist 1 (100 mg/kg). The ability of LPA1 antagonist 1 to block histamine release at much lower plasma concentration suggests that further improvement of pharmacokinetic properties of this chemical class could lower the effective dose[1].
[1]. Qian Y, et al. Discovery of highly selective and orally active lysophosphatidic acid receptor-1 antagonists with potent activity on human lung fibroblasts. J Med Chem. 2012 Sep 13;55(17):7920-39.
Cas No. | 1396006-71-5 | SDF | |
Canonical SMILES | CC(N=N1)=C(NC(O[C@@H](C2=CC=CC=C2)C)=O)N1C3=CC=C(C4=CC=C(C5(CC5)C(O)=O)C=C4)C=C3 | ||
Formula | C28H26N4O4 | M.Wt | 482.53 |
الذوبان | Soluble in DMSO | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 2.0724 mL | 10.3621 mL | 20.7241 mL |
5 mM | 0.4145 mL | 2.0724 mL | 4.1448 mL |
10 mM | 0.2072 mL | 1.0362 mL | 2.0724 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 28 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *