(+)-MK 801 (Synonyms: Dizocilpine maleate;Dizocilpine hydrogen maleate;(+)-MK 801;MK 801) |
| رقم الكتالوجGC16616 |
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 70449-94-4
Sample solution is provided at 25 µL, 10mM.
(+)-MK 801 is a potent antagonist of NMDA with Ki value of 30.5nM [1].
MK 801 is a potent anticonvulsant exhibits both anxiolytic and sympathomimetic properties. It is found to be a noncompetitive antagonist of NMDA. MK 801 can penetrate into the central nervous system. In the in vitro assay, MK 801 binds to rat cerebral cortical membrane with high affinity in a saturable manner. This binding is reversible even when the concentration of MK 801 is up to 100μM. It is also found that the binding shows a regional specificity. Most of these binding sites are located in the hippocampus. In rat cortical-slice preparations, MK 801 causes a potent blockade of depolarizing responses to NMDA with a high selectivity. This effect is persistent. The blockade can also cause a suppression of the epileptiform activity induced by tetrodotoxin or other neurotoxin [1].
References:
[1] Wong EH, Kemp JA, Priestley T, Knight AR, Woodruff GN, Iversen LL . The anticonvulsant MK-801 is a potent N-methyl-D-aspartate antagonist. Proc Natl Acad Sci U S A. 1986 Sep;83(18):7104-8.
| Cell experiment: [1] | |
|
Cell lines |
Rat neocortical neurons |
|
Preparation method |
The solubility of this compound in DMSO is >10.45mg/mL. General tips for obtaining a higher concentration: Please warm the tube at 37 °C for 10 minutes and/or shake it in the ultrasonic bath for a while.Stock solution can be stored below -20°C for several months. |
|
Reaction Conditions |
10 μM, 11 sec |
|
Applications |
Cell was held at -70 mV in the whole-cell recording mode, bathed in the Mg2+-free external solution. Application of 200 μM N-Me-D-Asp elicited an inward current that rose rapidly to a peak and then decayed to a steady current. When N-Me-D-Asp and 10 μM MK-801 were applied simultaneously, the current reached nearly the same peak but was then progressively blocked with a time constant of about 11 sec. The blockade by MK-801 persisted when the cell was washed with control solution for 20 sec. |
| Animal experiment: [2] | |
|
Animal models |
Male Wistar rats |
|
Dosage form |
Intrathecal injection, 20 μg |
|
Applications |
The rats were given morphine (15 μg/h) for 5 days. On day 5 on which tolerance developed, at 3 h after discontinuation of morphine infusion, MK-801 was injected intrathecally 30 min before morphine challenge (15 μg). Pretreatment with MK-801 preserved its antinociceptive effect in morphine-tolerant rats in a dose-dependent manner, with amaximal effect at 60 min. The dose of 10 μg ofMK-801 resulted in only slight preservation of morphine-induced antinociception, while 5 μg of MK-801 had no effect. Injection of 20 μg of MK-801 significantly improved morphine-induced antinociception, with a maximal effect (MPE%) of up to 61%, with a 10 s tail-flick latency being defined as 100% MPE in saline-infused rats. |
|
Other notes |
Please test the solubility of all compounds indoor, and the actual solubility may slightly differ with the theoretical value. This is caused by an experimental system error and it is normal. |
|
References: [1] Huettner J E, Bean B P. Block of N-methyl-D-aspartate-activated current by the anticonvulsant MK-801: selective binding to open channels. Proceedings of the National Academy of Sciences, 1988, 85(4): 1307-1311. [2] Liu C H, Cherng C H, Lin S L, et al. N-methyl-D-aspartate receptor antagonist MK-801 suppresses glial pro-inflammatory cytokine expression in morphine-tolerant rats. Pharmacology Biochemistry and Behavior, 2011, 99(3): 371-380. | |
| Cas No. | 70449-94-4 | SDF | |
| المرادفات | Dizocilpine maleate;Dizocilpine hydrogen maleate;(+)-MK 801;MK 801 | ||
| Chemical Name | (5S,10R)-5-methyl-10,11-dihydro-5H-5,10-epiminodibenzo[a,d][7]annulene | ||
| Canonical SMILES | C[C@]1(N2)C3=C(C=CC=C3)C[C@@H]2C4=C1C=CC=C4 | ||
| Formula | C16H15N | M.Wt | 221.3 |
| الذوبان | ≥ 10.45 mg/mL in DMSO, ≥ 102.6 mg/mL in EtOH | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 4.5188 mL | 22.5938 mL | 45.1875 mL |
| 5 mM | 0.9038 mL | 4.5188 mL | 9.0375 mL |
| 10 mM | 0.4519 mL | 2.2594 mL | 4.5188 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 30 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *