Ensartinib (X-396) (Synonyms: X-396) |
| Catalog No.GC33190 |
Ensartinib (X-396) (X-396) is a potent and dual ALK/MET inhibitor with IC50s of <0.4 nM and 0.74 nM, respectively.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1370651-20-9
Sample solution is provided at 25 µL, 10mM.
;)
_1-7.$$$37316672@70.jpg');)
;)
;)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
;)
;)
;)
_1124-1138.$$$35908550@30.jpg');)
_766-780.$$$37100057@30.jpg');)
_418-432.$$$36893736@30.jpg');)
_240-255.$$$35108512@29.jpg');)
_533-545.$$$36543525@28.jpg');)
_264-276.$$$36600053@22.jpg');)
_2214998.$$$@0.jpg');)
Ensartinib (X-396) is a potent and dual ALK/MET inhibitor with IC50s of <0.4 nM and 0.74 nM, respectively.
The ability of Ensartinib (X-396) to inhibit the growth of different cancer cell lines harboring ALK fusions or point mutations is tested. Ensartinib is potent in H3122 lung cancer cells harboring EML4-ALK E13;A20 (IC50: 15nM). Ensartinib is also potent in H2228 lung cancer cells harboring EML4-ALK E6a/b; A20 (IC50: 45 nM). Furthermore, X-376 is potent in SUDHL-1 lymphoma cells harboring NPM-ALK (IC50: 9 nM). X-376 also inhibits SY5Y neuroblastoma cells harboring ALK F1174L, MKN-45 gastric carcinoma cells harboring MET dependent, HepG2 cells and PC-9 lung cancer cell lines harboring EGFR exon 19 del with IC50s of 68 nM, 156 nM, 9.644 μM and 2.989 μM, respectively[1].
The effects of Ensartinib (X-396) in vivo against H3122 xenografts are examined. A pharmacokinetic study reveals that Ensartinib shows substantial bioavailability and moderate half-lives in vivo. Nude mice harboring H3122 xenografts are treated with Ensartinib at 25mg/kg bid. Ensartinib significantly delays the growth of tumors compared to vehicle alone. In the xenograft experiments, Ensartinib appears well-tolerated in vivo. Mouse weight is unaffected by Ensartinib treatment. Drug-treated mice appear healthy and do not display any signs of compound related toxicity. To further assess potential side effects of Ensartinib, additional systemic toxicity and toxico-kinetic studies are performed in Sprague Dawley (SD) rats. Following 10 days of repeated oral administration of Ensartinib at 20, 40, 80 mg/kg in SD rats, all animals survive to study termination. The no significant toxicity (NST) levels are determined to be 80mg/kg for Ensartinib. At NST levels, Ensartinib achieves an AUC of 66 μM×hr and a Cmax of 7.19 μM[1].
[1]. Lovly CM, et al. Insights into ALK-driven cancers revealed through development of novel ALK tyrosine kinaseinhibitors. Cancer Res. 2011 Jul 15;71(14):4920-31.
Cell experiment: | For viability experiments, cells are seeded in 96-well plates at 25%-33% confluency and exposed to drugs.The human lung adenocarcinoma cell lines H3122 and H2228 are treated with Ensartinib (10, 30, 100, 300 and 1000 nM). SUDHL-1 lymphoma cells are treated with Ensartinib (5, 10, 30, 100 and 300 nM). SY5Y neuroblastoma cells are treated with Ensartinib (30, 100, 300 and 1000 nM). At 72 hours post Ensartinib addition, Cell Titer Blue Reagent is added and fluorescence is measured on a Spectramax spectrophotometer. All experimental points are set up in hextuplicate replicates and are performed at least two independent times. IC50s are calculated using GraphPad Prism version 5 for Windows. The curves are fit using a nonlinear regression model with a log (inhibitor) vs. response formula[1]. |
Animal experiment: | Mice[1] Nude mice (nu/nu) are injected with H3122 cells. Once tumors reach an average volume of 450 mm3, a total of 27 athymic mice harboring H3122 tumors are randomized and dosed via oral gavage with 25mg/kg Ensartinib (X-396) or the control vehicle. Two, five, and fifteen hours after the single treatment (3 tumors/timepoint/group), mice are sacrificed and serum is collected for assessment of drug concentration using an LC-MS based bioanalytical method. |
References: [1]. Lovly CM, et al. Insights into ALK-driven cancers revealed through development of novel ALK tyrosine kinaseinhibitors. Cancer Res. 2011 Jul 15;71(14):4920-31. | |
| Cas No. | 1370651-20-9 | SDF | |
| Synonyms | X-396 | ||
| Canonical SMILES | O=C(C1=NN=C(N)C(O[C@@H](C2=C(Cl)C=CC(F)=C2Cl)C)=C1)NC3=CC=C(C(N4C[C@@H](C)N[C@@H](C)C4)=O)C=C3 | ||
| Formula | C26H27Cl2FN6O3 | M.Wt | 561.44 |
| Solubility | Soluble in DMSO | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 1.7811 mL | 8.9057 mL | 17.8113 mL |
| 5 mM | 0.3562 mL | 1.7811 mL | 3.5623 mL |
| 10 mM | 0.1781 mL | 0.8906 mL | 1.7811 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 36 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *