Mirabegron (YM178) (Synonyms: YM-178) |
カタログ番号GC11915 |
ミラベグロン (YM178) は選択的 β3-アドレナリン受容体アゴニストで、EC50 は 22.4 nM です。
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 223673-61-8
Sample solution is provided at 25 µL, 10mM.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Cell experiment: |
CHO cells (105) are seeded in each well of a 24-well culture plate and subcultured. Three days later, the medium is exchanged with 250 μL/well Hanks' balanced salt solution containing 0.1 mM 3-isobutyl-1-methylxanthine, pH 7.4. The cells are incubated with each compound (isoproterenol, Mirabegron, BRL37344, and CL316,243 at final concentrations of 10-10 to 10-4 M) for 10 min at 37°C, after which incubation is stopped by the addition of 250 μL of 0.2 M HCl. cAMP concentration in the reaction mixture is measured by radioimmunoassay using an 125I-cAMP assay system using a gamma counter. Fifty microliters of reaction mixture is incubated with 50 μL of succinyl agent for 10 min at room temperature, after which the reaction is stopped by the addition of 400 μL of buffer solution. Fifty microliters of succinylated sample is incubated with 50 μL of 125I-cAMP and 50 μL of anti-cAMP antibody for 24 h at 4°C. At the end of the incubation period, 250 μL of charcoal suspension is added and centrifuged for 10 min at 2800g at 4°C. Two hundred and fifty microliters of supernatant is transferred into a tube and counted for 1 min using a gamma counter. The intrinsic activity (I.A.) relative to isoproterenol for each β-adrenoceptor agonist is calculated using the maximal response of each compound[1]. |
Animal experiment: |
Rats[1] Male (350 to 400 g) and female (225 to 290 g) Wistar rats are used. The free-form doses of 0.03, 0.1, 0.3, 1 and 3 mg/kg for Mirabegron and 0.0272, 0.0907, 0.272, 0.907, and 2.72 mg/kg for oxybutynin are used in this study. |
References: [1]. Takasu T, et al. Effect of (R)-2-(2-aminothiazol-4-yl)-4'-{2-[(2-hydroxy-2-phenylethyl)amino]ethyl} acetanilide (YM178), a novel selective beta3-adrenoceptor agonist, on bladder function. J Pharmacol Exp Ther. 2007 May;321(2):642-7. |
Mirabegron is a selective β3-adrenoceptor agonist with EC50 of 22.4 nM.
Mirabegron (YM178) increases cyclic AMP accumulation in Chinese hamster ovary (CHO) cells expressing human β3-adrenoceptor (AR). EC50 value is 22.4 nM. EC50 values of Mirabegron for human β1- and β2-ARs are 10,000 nM or more, respectively. EC50 of Mirabegron in rat bladder strips precontracted with 10-6 M Carbachol (CCh) is 5.1 μM, whereas that in human bladder strips precontracted with 10-7 M CCh is 0.78 μM. Mirabegron concentration-dependently increases the accumulation of cAMP in CHO cells expressing human β3-ARs, with an EC50 value and I.A. of 22.4 nM and 0.8, respectively. Mirabegron has little agonistic effect on β1- and β2-ARs. Compared by EC50 value, Mirabegron is approximately one third as potent as isoproterenol. The maximal relaxant effects of Mirabegron are 94±1%, that of CCh, indicating that Mirabegron acts a full agonist in the rat bladder. The maximal relaxant effects of Mirabegron is 89.4±2.3%[1].
Mirabegron (YM178) produces a dose-dependent decrease in the frequency of rhythmic bladder contraction in anesthetized rats. In contrast, Mirabegron does not decrease the amplitude of rhythmic bladder contraction at up to 3 mg/kg i.v.. On the contrary, Oxybutynin significantly increases the frequency of rhythmic bladder contraction and decreased its amplitude at doses of 0.272 mg/kg i.v. or more[1].
References:
[1]. Takasu T, et al. Effect of (R)-2-(2-aminothiazol-4-yl)-4'-{2-[(2-hydroxy-2-phenylethyl)amino]ethyl} acetanilide (YM178), a novel selective beta3-adrenoceptor agonist, on bladder function. J Pharmacol Exp Ther. 2007 May;321(2):642-7.
Cas No. | 223673-61-8 | SDF | |
同義語 | YM-178 | ||
Chemical Name | 2-(2-amino-1,3-thiazol-4-yl)-N-[4-[2-[[(2R)-2-hydroxy-2-phenylethyl]amino]ethyl]phenyl]acetamide | ||
Canonical SMILES | C1=CC=C(C=C1)C(CNCCC2=CC=C(C=C2)NC(=O)CC3=CSC(=N3)N)O | ||
Formula | C21H24N4O2S | M.Wt | 396.51 |
溶解度 | ≥ 19.8mg/mL in DMSO | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
1 mg | 5 mg | 10 mg | |
1 mM | 2.522 mL | 12.61 mL | 25.22 mL |
5 mM | 0.5044 mL | 2.522 mL | 5.044 mL |
10 mM | 0.2522 mL | 1.261 mL | 2.522 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Average Rating: 5
(Based on Reviews and 25 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *