Vernakalant Hydrochloride |
カタログ番号GC10038 |
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 748810-28-8
Sample solution is provided at 25 µL, 10mM.
IC50: Vernakalant inhibits two specific potassium currents, IKur (IC50 = 9 μΜ) and IKACh (ΙC50=10 μM) which are only present in atrial myocardium [1].
Vernakalant blocks atrial potassium channels, thereby prolonging repolarization. It differs from typical class III agents by blocking a certain type of potassium channel, the cardiac transient outward potassium current, with increased potency as the heart rate increases. It also slightly blocks the hERG potassium channel, resulting in a prolonged QT interval. In addition, vernakalant also blocks atrial sodium channels.
In vitro: Previous study indicated that vernakalant showed selectivity for voltage-gated K+ channels, which were Kv1.5, Kv4.2, Kv4.3 and hERG channels, among which the Kv1.5 channel block was most potent. Such potent inhibitory effects occurred when the channel was probably in the activated state, since vernakalant caused a more pronounced reduction of the steady-state current amplitude in comparison to the early current [2].
Ex vivo: An previous ex vivo study of human atrial tissue from sinus rhythm and chronic atrial fibrillation indicated that the rate-dependent block of Na+ channels represented the main antiarrhythmic mechanism of vernakalant in the fibrillating atrium. In this study, vernakalant was found to prolong early repolarization in SR and AF, but late only in AF. Vernakalant did not reduce outward potassium currents compared with time-matched controls. However, area under the current–time curve was reduced due to acceleration of current decline with IC50s of 19 and 12 mM for SR and AF, respectively [3].
Clinical trial: Vernakalant (INN; codenamed RSD1235, proposed tradenames Kynapid and Brinavess), initially developed by Cardiome Pharma, is an investigational drug under regulatory review for the acute conversion of atrial fibrillation. Its intravenous formulation was later bought by Merck in April 2009. On December 2007, the Cardiovascular and Renal Drugs Advisory Committee of the US Food and Drug Administration (FDA) voted to recommend the approval of vernakalant, however, in August 2008 the FDA required necessary additional information for approval. Finially, on 1 September 2010, vernakalant under brand name Brinavess was approved in Europe. In addition, an oral formulation underwent Phase II clinical trials between 2005 and 2008.
Reference:
[1] Bronis, Kostas; Metaxa, Sofia; Koulouris, Spyridon; Manolis, Antonis S. Vernakalant: review of a novel atrial selective antiarrhythmic agent and its place in current treatment ofatrial fibrillation. Hospital Chronicles 2012, 7(3): 171−181
[2] Cheng JWM. Vernakalant in the management of atrial fibrillation. Ann Pharmacother 2008;42:533-42
[3] Wettwer E, Christ T, Endig S, Rozmaritsa N, Matschke K, Lynch JJ, Pourrier M, Gibson JK, Fedida D, Knaut M, Ravens U. The new antiarrhythmic drug vernakalant: ex vivo study of human atrial tissue from sinus rhythm and chronic atrial fibrillation. Cardiovasc Res. 2013;98(1):145-54.
Cas No. | 748810-28-8 | SDF | |
Chemical Name | (3R)-1-[(1R,2R)-2-[2-(3,4-dimethoxyphenyl)ethoxy]cyclohexyl]pyrrolidin-3-ol;hydrochloride | ||
Canonical SMILES | COC1=C(C=C(C=C1)CCOC2CCCCC2N3CCC(C3)O)OC.Cl | ||
Formula | C20H32ClNO4 | M.Wt | 385.93 |
溶解度 | DMSO:50 mg/mL (129.56 mM; Need ultrasonic); Water:50 mg/mL (129.56 mM; Need ultrasonic) | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 2.5911 mL | 12.9557 mL | 25.9114 mL |
5 mM | 0.5182 mL | 2.5911 mL | 5.1823 mL |
10 mM | 0.2591 mL | 1.2956 mL | 2.5911 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 30 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *