>>Signaling Pathways>> JAK/STAT Signaling>> JAK>>BMS-066

BMS-066

Catalog No.GC32028

BMS-066은 IC50이 각각 9nM 및 72nM인 IKKβ/Tyk2 슈도키나제 억제제입니다.

Products are for research use only. Not for human use. We do not sell to patients.

BMS-066 Chemical Structure

Cas No.: 914946-88-6

Size 가격 재고 수량
250mg Please Inquire Please Inquire
500mg Please Inquire Please Inquire

Tel:(909) 407-4943 Email: sales@glpbio.com

고객 리뷰

Based on customer reviews.

  • GlpBio Citations

    GlpBio Citations
  • Bioactive Compounds Premium Provider

    Bioactive Compounds Premium Provider

Sample solution is provided at 25 µL, 10mM.

Product Documents

Quality Control & SDS

View current batch:

Protocol

Cell experiment:

When measuring the inhibition by BMS-066 of the phosphorylation of IkBα in human PBMCs, cells at a density of 1×107 per mL in RPMI 1640 medium supplemented with 10% FBS are preincubated for 30 min BMS-066 at 37°C. Cells are then stimulated for 5 min with LPS (100 ng/mL) and pelleted by rapid centrifugation; the pellets are solubilized by use of ice-cold 10×cell lysis buffer. To measure effects on transcription, human PBMCs are plated on 24-well plates at a density of 3×106 cells/well in RPMI 1640 medium plus 10% FBS and HEPES with varying concentrations of BMS-066 (0-10 μM)[1].

Animal experiment:

Rats, Mice[1]Male Lewis rats (225 g) are used. Vehicle (0.02 N HCl) or BMS-066 in vehicle is administered by oral gavage beginning on the day of adjuvant challenge. Eight animals are included in each treatment group. Male Lewis rats (250 g) are immunized intraperitoneally with 200 μg/rat of keyhole limpet hemocyanin diluted in phosphate-buffered saline. BMS-066 in 0.02 N HCl is administered by oral gavage once daily beginning on the day of immunization. Blood samples were collected on day 7 and on day 14 under isoflurane anesthesia. Male DBA/1 mice (20-25 g) are immunized with 200 μg/mouse of bovine type II collagen in 0.1 mL at the base of the tail on day 0 and on day 21. Vehicle (0.02 N HCl) or BMS-066 in vehicle is administered by oral gavage twice daily beginning on day 21. Mice were monitored after the second immunization for the development of paw inflammation. Each paw was individually scored as follows: 0, normal; 1, one or more swollen digits; 2, mild paw swelling; 3, moderate paw swelling; 4, fusion of joints/ankylosis[1].

References:

[1]. Gillooly KM, et al. Periodic, partial inhibition of IkappaB Kinase beta-mediated signaling yields therapeutic benefit in preclinical models of rheumatoid arthritis. J Pharmacol Exp Ther. 2009 Nov;331(2):349-60.
[2]. Tokarski JS, et al. Tyrosine Kinase 2-mediated Signal Transduction in T Lymphocytes Is Blocked by Pharmacological Stabilization of Its Pseudokinase Domain. J Biol Chem. 2015 Apr 24;290(17):11061-74.

Background

BMS-066 is an IKKβ/Tyk2 pseudokinase inhibitor, with IC50s of 9 nM and 72 nM, respectively.

BMS-066 is shown to inhibit IKKβ-catalyzed phosphorylation of IKKβ in vitro with an IC50 of 9 nM and is more than 500-fold selective for IKKβ over the closely related IKKα. To understand the selectivity on a more comprehensive scale, BMS-066 is assayed against 155 additional kinases at 10 μM, and only six of these kinases are inhibited more than 75%. This indicates that BMS-066 is more than 400-fold selective for IKKβ over more than 95% of the kinases tested. For the six kinases showing more than 75% inhibition at 10 μM, IC50 values are determined in dose-response assays and BMS-066 is shown to be more than 30-fold selective against even the next most potently inhibits kinase (Brk). BMS-066 inhibits LPS-stimulated cytokine production in human peripheral blood mononuclear cells, both at the protein and message level, with IC50 values of approximately 200 nM against these endpoints. BMS-066 inhibits the IKKβ-catalyzed phosphorylation of IkBα in LPS stimulated cells with a similar IC50 value[1]. BMS-066 shows IC50 values of 72 and 1020 nM against the Tyk2 pseudokinase domain probe displacement and IL-23-stimulated reporter assays, respectively[2].

Once daily oral doses of 5 and 10 mg/kg starting at the time of adjuvant injection on day 1 significantly reduces paw swelling compared with vehicle-treated rats at the end of the study, with the high dose showing nearly complete suppression. The talocrural (ankle) joint space is narrowed. Inflammatory exudates containing neutrophils and cell debris are also evident within the joint space. The joints from animals receiving 10 mg/kg BMS-066 are normal or show minimal changes in both inflammation and bone resorption. Clear reduction of inflammation is also evident in the low dose of BMS-066 (5 mg/kg) and the bone resorption seems to be more focal and less severe compared with the control. Microcomputed tomography of the hind limbs also show that BMS-066 provides a dose-dependent protection against the pitting, loss of bone mass, woven porous bone, and fusion of the small bones evident in the rats. Bone density measurements also show a clear dose-dependent benefit of treatment with BMS-066. Serum drug level measurements in satellite animals on the first day of dosing show that a single dose provides coverage for approximately 3 h (6 h daily with twice daily dosing) of the mouse whole-blood IC50 value against LPS-induced TNF-α. It is also showed that IKKβ inhibitors suppress TNF-α and IL-1β production within these tissues in experimental arthritis model[1].

[1]. Gillooly KM, et al. Periodic, partial inhibition of IkappaB Kinase beta-mediated signaling yields therapeutic benefit in preclinical models of rheumatoid arthritis. J Pharmacol Exp Ther. 2009 Nov;331(2):349-60. [2]. Tokarski JS, et al. Tyrosine Kinase 2-mediated Signal Transduction in T Lymphocytes Is Blocked by Pharmacological Stabilization of Its Pseudokinase Domain. J Biol Chem. 2015 Apr 24;290(17):11061-74.

Chemical Properties

Cas No. 914946-88-6 SDF
Canonical SMILES CN1C=NC2=C1C(C=C(C3=CC=CC(CNC(COC)=O)=N3)N4)=C4N=C2NC
Formula C19H21N7O2 M.Wt 379.42
Solubility Soluble in DMSO Storage Store at -20°C
General tips Please select the appropriate solvent to prepare the stock solution according to the solubility of the product in different solvents; once the solution is prepared, please store it in separate packages to avoid product failure caused by repeated freezing and thawing.Storage method and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored at -20°C, please use it within 1 month.
To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time.
Shipping Condition Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request.

Complete Stock Solution Preparation Table

Prepare stock solution
1 mg 5 mg 10 mg
1 mM 2.6356 mL 13.178 mL 26.356 mL
5 mM 0.5271 mL 2.6356 mL 5.2712 mL
10 mM 0.2636 mL 1.3178 mL 2.6356 mL
  • Molarity Calculator

  • Dilution Calculator

Mass
=
Concentration
x
Volume
x
MW*
 
 
 
**When preparing stock solutions always use the batch-specific molecular weight of the product found on the vial label and MSDS / CoA (available online).

Calculate

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

mg/kg g μL

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO % % Tween 80 % ddH2O
%DMSO %

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.

리뷰

Review for BMS-066

Average Rating: 5 ★★★★★ (Based on Reviews and 36 reference(s) in Google Scholar.)

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Review for BMS-066

GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.

Required fields are marked with *

You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.