Pemetrexed disodium hemipenta hydrate |
Catalog No.GC17694 |
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 357166-30-4
Sample solution is provided at 25 µL, 10mM.
Kinase experiment: |
AICARFT inhibition assays are carried out at room temperature by monitoring the formation of [6S]-5,6,7,8-tetrahydrofolate from 10-formyl-[6R,S]-5,6,7,8-tetrahydrofolate at A298. All solutions are purged with N2 gas prior to use. The reaction solution contains 33 mM Tris-Cl, pH 7.4, 25 mM KCl, 5 mM 2-Mercaptoethanol, 0.05 mM AICA ribonucleotide, and 16 nM (2 milliunits/mL) of AICARFT. 10-Formyl-[6R,S]-5,6,7,8-tetrahydrofolate concentrations of 0.037, 0.074, and 0.145 mM are used (0.61, 1.23, and 2.45 times its Km value, respectively). LY231514 is tested as an inhibitor at 0.08-0.8 mM (four concentrations). When the tri- and pentaglutamates of LY231514 are used as inhibitors, the concentrations are 0.0005-0.009 mM (eight concentrations). Enzyme assays are initiated by the addition of enzyme. Data is analyzed using the ENZFITTER program for competitive inhibition. |
Cell experiment: |
Dose-response curves are generated to determine the concentration required for 50% inhibition of growth (IC50). Pemetrexed is dissolved initially in DMSO at a concentration of 4 mg/mL and further diluted with cell culture medium to the desired concentration. CCRF-CEM leukemia cells in complete medium are added to 24-well Cluster plates at a final concentration of 4.8×104 cells/well in a total volume of 2 mL. Test compounds at various concentrations are added to duplicate wells so that the final volume of DMSO is 0.5%. The plates are incubated for 72 h at 37°C in an atmosphere of 5% CO2 in air. At the end of the incubation, cell numbers are determined on a ZBI Coulter counter. Control wells usually contain 4×105 to 6×105 cells at the end of the incubation. For several studies, IC50s are determined for each compound in the presence of either 300 μM AICA, 5 μM thymidine, 100 μM hypoxanthine, or combination of 5 μM hymidine plus 100 μM hypoxanthine[1]. |
Animal experiment: |
Dose-response curves are generated to determine the concentration required for 50% inhibition of growth (IC50). Pemetrexed is dissolved initially in DMSO at a concentration of 4 mg/mL and further diluted with cell culture medium to the desired concentration. CCRF-CEM leukemia cells in complete medium are added to 24-well Cluster plates at a final concentration of 4.8×l04 cells/well in a total volume of 2 mL. Test compounds at various concentrations are added to duplicate wells so that the final volume of DMSO is 0.5%. The plates are incubated for 72 h at 37°C in an atmosphere of 5% CO2 in air. At the end of the incubation, cell numbers are determined on a ZBI Coulter counter. Control wells usually contain 4×105 to 6×105 cells at the end of the incubation. For several studies, IC50s are determined for each compound in the presence of either 300 μM AICA, 5 μM thymidine, 100 μM hypoxanthine, or combination of 5 μM hymidine plus 100 μM hypoxanthine[1]. |
References: [1]. Shih C, et al. LY231514, a pyrrolo[2,3-d]pyrimidine-based antifolate that inhibits multiple folate-requiring enzymes. Cancer Res. 1997 Mar 15;57(6):1116-23. |
Cas No. | 357166-30-4 | SDF | |
Chemical Name | tetrasodium;(2S)-2-[[4-[2-(2-amino-4-oxo-1,7-dihydropyrrolo[2,3-d]pyrimidin-5-yl)ethyl]benzoyl]amino]pentanedioate;pentahydrate | ||
Canonical SMILES | C1=CC(=CC=C1CCC2=CNC3=C2C(=O)N=C(N3)N)C(=O)NC(CCC(=O)O)C(=O)O.O.[Na+] | ||
Formula | C20H24N5Na2O8.5 | M.Wt | 516.41 |
Solubility | ≥ 23.42 mg/mL in Water with gentle warming | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 1.9364 mL | 9.6822 mL | 19.3645 mL |
5 mM | 0.3873 mL | 1.9364 mL | 3.8729 mL |
10 mM | 0.1936 mL | 0.9682 mL | 1.9364 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 30 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *