AS601245 (Synonyms: AS-601245, c-Jun N-terminal Kinase Inhibitor V) |
Catalog No.GC10010 |
AS601245 es un inhibidor de JNK (proteÍna quinasa c-Jun NH2-terminal) competitivo con ATP, selectivo y activo por vÍa oral con IC50 de 150, 220 y 70 nM para tres isoformas humanas de JNK (hJNK1, hJNK2 y hJNK3), respectivamente.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 345987-15-7
Sample solution is provided at 25 µL, 10mM.
Description:
IC50: 150, 220, and 70 nM for hJNK1, hJNK2, and hJNK3, respectively
Recent evidence suggests activation of the c-Jun NH2-terminal protein kinase (JNK) signal transduction pathway may play a role in ischemia-induced cell death. Therefore, preventing the activation of JNK, or c-Jun phosphorylation could be neuroprotective. AS601245 is a c-Jun NH2-terminal protein kinase inhibitor.
In vitro: AS601245 demonstrated a nonspecific inhibition of the three JNK human isoforms. AS601245 inhibits isolated hJNK3 in an ATPcompetitive manner. Selectivity of AS601245 was tested against a large panel of kinases. It exhibited 10- to 20-fold selectivity over c-src, CDK2, and c-Raf and more than 50- to 100-fold selectivity over a range of Tyr- and Ser/Thr-protein kinases [1].
In vivo: AS601245 administered i.p. provided significant protection against the delayed loss of hippocampal CA1 neurons in a gerbil model of transient global ischemia. This effect is mediated by JNK inhibition and thus by c-Jun expression and phosphorylation. A significant neuroprotective effect of AS601245 administered either by i.p. injection or as i.v. bolus followed by an i.v. infusion was also observed in rats after focal cerebral ischemia [1].
Clinical trial: Up to now, AS601245 is still in the preclinical development stage.
Reference:
[1] Carboni S, Hiver A, Szyndralewiez C, Gaillard P, Gotteland JP, Vitte PA. AS601245 (1,3-benzothiazol-2-yl (2-[[2-(3-pyridinyl) ethyl] amino]-4 pyrimidinyl) acetonitrile): a c-Jun NH2-terminal protein kinase inhibitor with neuroprotective properties. J Pharmacol Exp Ther. 2004 Jul;310(1):25-32. Epub 2004 Feb 26.
Kinase experiment: | Rat JNK3 assays are performed in 96-well low binding Corning MTT plates: 0.5 μg of recombinant, preactivated GST-JNK3 is incubated with 1 μg of recombinant, biotinylated GST-c-Jun and 2 μM [33Pγ]ATP (2 nCi/μl), in the presence or absence of compounds according to formula I and in a reaction volume of 50 μL containing 50 mM Tris-HCl, pH 8.0; 10 mM MgCl2, 1 mM Dithiothreitol, and 100 μM NaVO4, for 120 min and at room temperature. The reaction is stopped by the addition of 200 μL of a solution containing 250 μg of Streptavidin-coated SPA beads, 5 mM EDTA, 0.1% Triton X-100, and 50 μM ATP, in phosphate saline buffer and further incubation at room temperature for 60 min. After incubation, beads are sedimented by centrifugation at 1500g for 5 min, resuspended in 200 μL of phosphate-buffered saline (PBS) containing 5 mM EDTA, 0.1% Triton X-100, and 50 μM ATP and the radioactivity is measured in a scintillation beta counter, following further sedimentation of the beads by settling down for 60 min at room temperature. Similar method is used to demonstrate inhibition of JNK1 and JNK2[1]. |
Cell experiment: | CaCo-2 cell proliferation is evaluated by using the kit “CellTiter-Glo Luminescent Cell Viability Assay”. This highly sensitive assay detects the luminescence released by the metabolically active cells. Quantification of luminescence is expressed as RLU (relative light unit). For the proliferation experiments, treatments are performed by adding the drugs (e.g., 0.1 μM AS601245) to the CaCo-2 cells seeded at about 4,000 cells/well in a 96-well plate. HepG2 cell proliferation is analysed through the MTT method. Briefly, 1500 cells/well are seeded in 200 μL of serum-supplemented media and the following day treated with the drugs (e.g, 0.1 μM AS601245). 20 μL of 5 mg/mL thiazolyl blue tetrazolium bromide is subsequently added to the cells and removed 2 hours later. 100 μL of DMSO is added to the cells, and the absorbance is recorded at 570 nm through a 96 well plate ELISA reader. Viability is evaluated through Trypan blue exclusion test[2]. |
Animal experiment: | Mice[1]C3H/HEN mice receive an oral treatment with AS601245 (0.3, 1, 3, or 10 mg/kg). Fifteen minutes later, Endotoxins (0.3 mg/kg) are i.p. injected. Heparinized whole blood is collected by retro orbital puncture under isoflurane anesthesia. TNF-α is determined in plasma using an enzyme-linked immunosorbent assay kit. Control animals receive 0.5% CMC/0.25% Tween 20 (10 mL/kg) as vehicle[1].Rats[1]Wistar rats are randomly divided into a vehicle-treated control group, a reference compound-treated group, and a drug-treated group. The reference compound-treated group receive MK-801 (3 mg/kg i.p.) administered 1 h postischemia onset. The drug-treated group receive AS601245 (6, 18, or 60 mg/kg) administered at the initiation of reperfusion and 5 h later. Control animals receive 0.9% saline (10 ml/kg i.p.).Wistar rats are randomly divided into three groups. The reference compound-treated group receive MK-801 (3 mg/kg i.p.) administered 1 h postischemia onset. The drug-treated group receive an intravenous bolus of AS601245 (1 mg/kg) injected at the initiation of reperfusion followed by an intravenous infusion with a flow of 0.6 mg/kg/h during 22 h. Control animals receive a bolus plus an intravenous infusion of 0.9% saline (10 mL/kg)[1]. |
References: [1]. Carboni S, et al. AS601245 (1,3-benzothiazol-2-yl (2-[[2-(3-pyridinyl) ethyl] amino]-4 pyrimidinyl) acetonitrile): a c-Jun NH2-terminal protein kinase inhibitor with neuroprotective properties. J Pharmacol Exp Ther. 2004 Jul;310(1):25-32. |
Cas No. | 345987-15-7 | SDF | |
Sinónimos | AS-601245, c-Jun N-terminal Kinase Inhibitor V | ||
Chemical Name | (Z)-2-(benzo[d]thiazol-2-yl)-2-(2-((2-(pyridin-3-yl)ethyl)imino)-1,2-dihydropyrimidin-4-yl)acetonitrile | ||
Canonical SMILES | N#CC(C1=NC2=CC=CC=C2S1)C(C=CN/3)=NC3=N/CCC4=CN=CC=C4 | ||
Formula | C20H16N6S | M.Wt | 372.45 |
Solubility | ≥ 14.25mg/mL in DMSO, ≥ 10mg/mL in Water with gentle warming | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 2.6849 mL | 13.4246 mL | 26.8492 mL |
5 mM | 0.537 mL | 2.6849 mL | 5.3698 mL |
10 mM | 0.2685 mL | 1.3425 mL | 2.6849 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 13 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *