CC260 |
رقم الكتالوجGC62890
One-Click Copy Product Info
|
CC260 هو مثبط انتقائي PI5P4Kα و PI5P4Kβ مع Kis من 40 نانومتر و 30 نانومتر ، على التوالي
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 2411088-26-9
Sample solution is provided at 25 µL, 10mM.
_1-3.$$$39978408@51.jpg');)
_1-9.$$$38538795@65.jpg');)
_1-9.$$$39112701@51.jpg');)
_1-7.$$$37316672@70.jpg');)
_366-372.$$$36198801@70.jpg');)
.$$$38565142@65.jpg');)
_1867-1883.$$$33248023@67.jpg');)
_eads6055.$$$39977546@45.jpg');)
_eadm9805.$$$40080571@45.jpg');)
_eadj3020.$$$39666821@45.jpg');)
_1-20.$$$39757301@28.jpg');)
_1-24.$$$38898113@28.jpg');)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
_1-19.$$$37460805@44.jpg');)
_1291-1307.$$$34518654@46.jpg');)
CC260 is a selective PI5P4Kα and PI5P4Kβ inhibitor with Kis of 40 nM and 30 nM, respectively. CC260 does not inhibit or weakly inhibits other protein kinases, such as Plk1 and RSK2. CC260 can be used for cell energy metabolism, diabetes and cancer research[1].
In cultured C2C12 myotubes, CC260 (20 μM) enhances Insulin-induced Akt phosphorylation at both Thr-308 and Ser-473 but suppresses S6K phosphorylation (Thr-389) by mTORC1[1]. CC260 (2.5 μM, 5 μM, 10 μM, 20 μM) significantly increases phosphorylation of acetyl-CoA carboxylase (ACC) in a dose-dependent manner[1]. CC260 treatment reduces the ability of BT474 cells to survive serum starvation, which could be rescued by expressing the PI5P4Kβ refractory mutant[1]. In BT474 cells, CC260 treatment causes an increase in glycolytic ATP production[1].
[1]. Song Chen, et al. Pharmacological inhibition of PI5P4Kα/β disrupts cell energy metabolism and selectively kills p53-null tumor cells. Proc Natl Acad Sci U S A. 2021 May 25;118(21):e2002486118.
| Cas No. | 2411088-26-9 | SDF | |
| Formula | C24H29Cl2N5O2 | M.Wt | 490.43 |
| الذوبان | DMSO : 160 mg/mL (326.24 mM; Need ultrasonic) | Storage | |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.039 mL | 10.1951 mL | 20.3903 mL |
| 5 mM | 407.8 μL | 2.039 mL | 4.0781 mL |
| 10 mM | 203.9 μL | 1.0195 mL | 2.039 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 39 reference(s) in Google Scholar.)