CC-930 (Synonyms: Tanzisertib;CC930;CC 930) |
|
Katalog-Nr.GC10446
|
A potent JNK inhibitor
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 899805-25-5
Sample solution is provided at 25 µL, 10mM.
CC-930 is a potent and selective inhibitor of JNK1/JNK2/JNK3 with IC50 values of 61 nM, 7 nM and 6 nM respectively. [1]
JNKs (c-Jun N-terminal kinases) belong to kinases which were originally indentified. They bind to c-Jun then phosphorylate it on Ser-63 and Ser-73 which located in its transcriptional activation domain. JNKs belong to MAPK family. They contain ten isforms encoded by three genes: JNK1, JNK2 and JNK3. They are 46 KD or 55 KD protein. They play an important role in stress stimuli, such as heat shock, cytokines, and osmotic shock. They are also responsive to the cellular apoptosis pathway and T cell differentiation. They are activated through a dual phosphorylation of Thr and Tyr residues within a Thr-Pro-Tyr motif which located in kinase subdomain. JNKs modify the activity of many proteins that act in the nucleus reside or at the mitochondria. JNKs activate the downstream molecules which include p53, c-Jun, ELK1, SMAD4 and HSF1. JNKs regulate several important cellular functions, such as cell growth, survival, differentiation and apoptosis.[2]
CC-930 kinetically competitive with ATP in the phosphorylation of the substrate c-Jun against all isoforms of JNK with Ki values of 44 ± 3 nM (JNK1), 6.2 ± 0.6 nM and IC50 value of 5 nm for JNK3. EGFR is the only non-MAP kinase which inhibited more than 50% at 3 M. It did not inhibit greater than 50% against 22 diverse non-kinase enzymes at 10 M.[1] CC-930 reduced the phosphorylation of c-Jun the stimulated by TGF β at 1 μM which is a clinically relevant concentration in fi broblasts[3] CC-930 also was showed the potent antifibrotic founctions in the TSK1 model. CC-930 reduced hypodermal thickening with a dose-dependent manner by up to 85±4% in TSK1 mice.[3] CC-930 has no effect on kidney hypertrophy, blood pressur, podocyte loss, glomerular fibrosis in diabetic spontaneously hypertensive rats (SHR). However, CC-930 reduced the levels of ccl2 mRNA in diabetic kidneys[4].
References:
[1]. Plantevin Krenitsky V, Nadolny L, Delgado M, Ayala L, Clareen SS, Hilgraf R, Albers R, Hegde S, D'Sidocky N, Sapienza J et al: Discovery of CC-930, an orally active anti-fibrotic JNK inhibitor. Bioorg Med Chem Lett, 22(3):1433-1438.
[2]. Waetzig V, Herdegen T: Context-specific inhibition of JNKs: overcoming the dilemma of protection and damage. Trends Pharmacol Sci 2005, 26(9):455-461.
[3]. Reich N, Tomcik M, Zerr P, Lang V, Dees C, Avouac J, Palumbo K, Horn A, Akhmetshina A, Beyer C et al: Jun N-terminal kinase as a potential molecular target for prevention and treatment of dermal fibrosis. Ann Rheum Dis, 71(5):737-745.
[4]. Lim AK, Ma FY, Nikolic-Paterson DJ, Ozols E, Young MJ, Bennett BL, Friedman GC, Tesch GH: Evaluation of JNK blockade as an early intervention treatment for type 1 diabetic nephropathy in hypertensive rats. Am J Nephrol, 34(4):337-346.
Cell experiment: | Systemic sclerosis (SSc) fibroblasts are incubated with 1 µM Tanzisertib (CC-930) in 96-well plates for 20 h. Then MTT is added at a final concentration of 1 mg/mL, and the cells are further incubated at 37°C for 4 h. Mock-treated fibroblasts are used as controls, and all other results are normalised to untreated cells. |
Animal experiment: | To evaluate the regression of fibrosis on inhibition of JNK, a modified model of bleomycin-induced dermal fibrosis is used. In this model, treatment is initiated 3 weeks after the beginning of the challenge with bleomycin, when significant dermal fibrosis is already established. The outcome of six different groups with a total number of 40 mice is analysed. The first group of mice receive subcutaneous injections of NaCl for 6 weeks. The second group is injected for 3 weeks with bleomycin followed by injections of NaCl for another 3 weeks to analyse the degree of fibrosis before treatment, and to control the spontaneous regression of fibrosis. The third group of mice is killed after 6 weeks of injections with bleomycin. The fourth and the fifth group are treated with Tanzisertib (CC-930) at doses of 50 mg/kg and 150 mg/kg for the last 3 weeks of continuous challenge with bleomycin for 6 weeks. The sixth group is a positive control group consisting of mice challenged with bleomycin for 6 weeks and treated in parallel with imatinib at doses of 50 mg/kg for the last 3 weeks. |
References: [1]. Plantevin Krenitsky V, et al. Discovery of CC-930, an orally active anti-fibrotic JNK inhibitor. Bioorg Med Chem Lett. 2012 Feb 1;22(3):1433-8. | |
| Cas No. | 899805-25-5 | SDF | |
| Überlieferungen | Tanzisertib;CC930;CC 930 | ||
| Chemical Name | 4-[[9-[(3S)-oxolan-3-yl]-8-(2,4,6-trifluoroanilino)purin-2-yl]amino]cyclohexan-1-ol | ||
| Canonical SMILES | C1CC(CCC1NC2=NC=C3C(=N2)N(C(=N3)NC4=C(C=C(C=C4F)F)F)C5CCOC5)O | ||
| Formula | C21H23F3N6O2 | M.Wt | 448.44 |
| Löslichkeit | DMF: 30 mg/ml,DMSO: 20 mg/ml,Ethanol: 30 mg/ml,Ethanol:PBS (pH7.2)(1:20): 0.05 mg/ml | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.23 mL | 11.1498 mL | 22.2995 mL |
| 5 mM | 446 μL | 2.23 mL | 4.4599 mL |
| 10 mM | 223 μL | 1.115 mL | 2.23 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.50% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 30 reference(s) in Google Scholar.)















