DiD (Synonyms: Cy5 DIC18) |
|
Catalog No.GC80362
|
DiD is a long-chain carbocyanine dye.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 75539-51-4
Sample solution is provided at 25 µL, 10mM.
In Vivo, Two weeks after injection of stained cells, a single, bright, DiD-positive cells located between 15 to 40 μm from the endosteum is found. Results reveal a progressive appearance of cell clusters of decreased dye intensity, consistent with the partitioning of DiD label on cell division[3].
In Vitro, Guidelines (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs). 1. Preparing Stain Solutions of DiD perchlorate 1.1 Prepare DMF, DMSO or ethanol mother liquor: The solutions should be prepared in dimethyl formamide (DMF), dimethylsulfoxide (DMSO, or ethanol DMSO at 1-5 mM. 1.2 Prepare working solutions: Dilute the stock solutions into a suitable buffer such as serum-free culture medium, HBSS or PBS to make 1-5 μM working solutions. We do not recommend storing the aqueous solution for more than one day. Note: The final concentration of the working solution should be empirically determined for different cell types and/or experimental conditions. 2. Cell staining (Suspension cells) 2.1 Centrifuge at 1000 g at 4°C for 3-5 minutes and then discard the supernatant. Wash twice with PBS, 5 minutes each time. The cell density is 1×106/mL. 2.2 Add 1 mL of DiD perchlorate working solution, and then incubate at room temperature for 5-30 minutes. 2.3 Centrifuge at 400 g at 4°C for 3-4 minutes and then discard the supernatant. 2.4 Wash twice with PBS, 5 minutes each time. 2.5 Resuspend cells with serum-free cell culture medium or PBS. Observation by fluorescence microscopy or flow cytometry. 3. Cell staining (Adherent cells) 3.1 Culture adherent cells on sterile coverslips. 3.2 Remove the coverslip from the medium and aspirate excess medium. 3.3 Add 100 μL of working solution, gently shake it to completely cover the cells, and then incubate at room temperature for 5-30 minutes. 3.4 Wash twice with medium, 5 minutes each time. Observation by fluorescence microscopy or flow cytometry.
References:
[1]. Gan WB, et al. Multicolor "DiOlistic" labeling of the nervous system using lipophilic dye combinations. Neuron. 2000 Aug;27(2):219-25.
[2]. Kenji Yumoto, et al. A novel method for monitoring tumor dormancy using fluorescent dye DiD. Cytometry A. 2014 Jun; 85(6): 548–555.
[3]. Meng Li, et al. In Vivo Tracking of Human Adipose-derived Mesenchymal Stem Cells in a Rat Knee Osteoarthritis Model with Fluorescent Lipophilic Membrane Dye. J Vis Exp. 2017; (128): 56273.
[4]. Lo Celso C, et al. Live-animal tracking of individual haematopoietic stem/progenitor cells in their niche.
| Cas No. | 75539-51-4 | SDF | |
| Synonyms | Cy5 DIC18 | ||
| Formula | C61H99IN2 | M.Wt | 987.36 |
| Solubility | Storage | Store at -20°C | |
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 1.0128 mL | 5.064 mL | 10.128 mL |
| 5 mM | 202.6 μL | 1.0128 mL | 2.0256 mL |
| 10 mM | 101.3 μL | 506.4 μL | 1.0128 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 30 reference(s) in Google Scholar.)















