FUB-NPB-22 |
| Catalog No.GC43705 |
PB-22, first reported in 2013, introduced 8-hydroxyquinoline as a substitution for the naphthalene group on traditional JWH-type synthetic cannabinoids.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 2244864-90-0
Sample solution is provided at 25 µL, 10mM.
;)
_1-7.$$$37316672@70.jpg');)
;)
;)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
;)
;)
;)
_1124-1138.$$$35908550@30.jpg');)
_766-780.$$$37100057@30.jpg');)
_418-432.$$$36893736@30.jpg');)
_240-255.$$$35108512@29.jpg');)
_533-545.$$$36543525@28.jpg');)
_264-276.$$$36600053@22.jpg');)
_2214998.$$$@0.jpg');)
PB-22 , first reported in 2013, introduced 8-hydroxyquinoline as a substitution for the naphthalene group on traditional JWH-type synthetic cannabinoids. [1][2] The analog NPB-22 differs from PB-22 by the replacement of indazole for indole. FUB-NPB-22 is an analog of NPB-22 in which the pentyl side chain is replaced by a 4-fluorobenzyl group. The physiological and toxicological properties of this compound are not known. This product is intended for forensic and research applications.
Reference:
[1]. Uchiyama, N., Matsuda, S., Kawamura, M., et al. Identification of two new-type designer drugs, piperazine derivative MT-45 (I-C6) and synthetic peptide Noopept (GVS-111), with synthetic cannabinoid A-834735, cathinone derivative 4-methoxy-α-PVP, and phenethylamine derivative 4-methylbuphedrine from illegal products. Forensic Toxicol. (2013).
[2]. Uchiyama, N., Matsuda, S., Kawamura, M., et al. Two new-type cannabimimetic quinolinyl carboxylates, QUPIC and QUCHIC, two new cannabimimetic carboxamide derivatives, ADB-FUBINACA and ADBICA, and five synthetic cannabinoids detected with a thiophene derivative α-PVT and an opioid receptor agonist AH-7921 identified in illegal products. Forensic Toxicol. 31(2), 223-240 (2013).
| Cas No. | 2244864-90-0 | SDF | |
| Chemical Name | quinolin-8-yl 1-(4-fluorobenzyl)-1H-indazole-3-carboxylate | ||
| Canonical SMILES | O=C(OC1=C(N=CC=C2)C2=CC=C1)C3=NN(CC4=CC=C(F)C=C4)C5=C3C=CC=C5 | ||
| Formula | C24H16FN3O2 | M.Wt | 397.4 |
| Solubility | 2mg/mL in ethanol, 20mg/mL in DMSO, 30mg/mL in DMF | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.5164 mL | 12.5818 mL | 25.1636 mL |
| 5 mM | 0.5033 mL | 2.5164 mL | 5.0327 mL |
| 10 mM | 0.2516 mL | 1.2582 mL | 2.5164 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >95.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 10 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *