SB590885 |
Catalog No.GC11890
One-Click Copy Product Info
|
Potent B-Raf inhibitor
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 405554-55-4
Sample solution is provided at 25 µL, 10mM.
_1-3.$$$39978408@51.jpg');)
_1-9.$$$38538795@65.jpg');)
_1-9.$$$39112701@51.jpg');)
_1-7.$$$37316672@70.jpg');)
_366-372.$$$36198801@70.jpg');)
.$$$38565142@65.jpg');)
_1867-1883.$$$33248023@67.jpg');)
_eads6055.$$$39977546@45.jpg');)
_eadm9805.$$$40080571@45.jpg');)
_eadj3020.$$$39666821@45.jpg');)
_1-20.$$$39757301@28.jpg');)
_1-24.$$$38898113@28.jpg');)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
_1-19.$$$37460805@44.jpg');)
_1291-1307.$$$34518654@46.jpg');)
SB590885 is a potent and selective inhibitor of B-Raf kinase with Ki value of 0.16nM [1].
SB590885 is a potent inhibitor of oncogenic B-Raf protein kinase with Ki value of 0.16nM. It is more potent to inhibit B-Raf than C-Raf. The Ki value of SB590885 for C-Raf is 1.72nM. SB590885 is a quite selective inhibitor. It shows no activity against 48 other human kinases such as Abl, AMPK, CK1, CK2 and ERK2. It is found that SB590885 binds to B-Raf within the ATP-binding pocket and stabilizes the active conformation of B-Raf. SB590885 decreases the phosphorylation of ERK and shows anti-proliferation only in tumor cells expressing oncogenic B-Raf V600E. The normal cells and tumor cells not expressing mutant B-Raf have no sensitivity towards SB590885 except the normal melanocytes and primary melanoma cells expressing wild-type B-Raf. Moreover, SB590885 is also found to decrease the transformed and tumorigenic properties of malignant cells expressing mutant B-Raf [1].
References:
[1] King A J, Patrick D R, Batorsky R S, et al. Demonstration of a genetic therapeutic index for tumors expressing oncogenic BRAF by the kinase inhibitor SB-590885. Cancer research, 2006, 66(23): 11100-11105.
Cell experiment: | For proliferation assays, cells are treated with compounds in 0.1% DMSO and incubated for 72 hours at 37°C, 5% CO2. Viable cells are quantified using CellTiter-Glo reagent and luminescence detection on a Victor 2V plate reader. Cells are prepared for cell cycle analysis on a Becton Dickinson FACScan, according to the manufacturer's instructions. Data is acquired and analyzed using CellQuest v3.3 software. Anchorage-independent growth assays are done as described elsewhere, with inhibitors or DMSO vehicle included in the agar layer. Cultures are re-fed with media and inhibitor or DMSO every 5 to 7 days for a total of 28 days. Colonies are visualized and photographed by conventional light microscopy and quantified by counting on a grid in triplicate. |
Animal experiment: | The pharmacokinetic properties and safety of SB-590885, following i.p. injection, are determined and 50 mg/kg daily injections are found to give therapeutic levels with minimal body weight changes. Tumors are initiated in 8- to 12-week-old female nude mice by s.c. injection of 5×106 A375P cells in Matrigel suspension, and 3 weeks after tumor induction when the tumors had reached a volume of 150 to 250 mm3, mice are randomized into groups of eight prior to treatment. Animals are treated with vehicle [2% N,N-dimethylacetamide, 2% Cremophor EL, and 96% acidified water (pH 4-5)], or vehicle containing 50 mg/kg of SB-590885 daily for 21 days. A cohort of mice treated with SB-590885 are then observed an additional 14 days following cessation of treatment. Tumor volume is measured for 55 days by calipers twice weekly. |
References: [1]. King AJ, et al. Demonstration of a genetic therapeutic index for tumors expressing oncogenic BRAF by the kinase inhibitor SB-590885. Cancer Res, 2006, 66(23), 11100-11105. | |
| Cas No. | 405554-55-4 | SDF | |
| Chemical Name | N,N-dimethyl-2-[4-[(4Z)-4-(1-nitroso-2,3-dihydroinden-5-ylidene)-5-(1H-pyridin-4-ylidene)-1H-imidazol-2-yl]phenoxy]ethanamine | ||
| Canonical SMILES | CN(C)CCOC1=CC=C(C=C1)C2=NC(=C3C=CC4=C(CCC4=C3)N=O)C(=C5C=CNC=C5)N2 | ||
| Formula | C27H27N5O2 | M.Wt | 453.55 |
| Solubility | ≥ 4.54mg/mL in DMSO with gentle warming | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.2048 mL | 11.0241 mL | 22.0483 mL |
| 5 mM | 441 μL | 2.2048 mL | 4.4097 mL |
| 10 mM | 220.5 μL | 1.1024 mL | 2.2048 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 31 reference(s) in Google Scholar.)