Ciliobrevin A (Synonyms: HPI-4) |
رقم الكتالوجGC11476 |
Ciliobrevin A (HPI-4) هو مثبط لمسار إشارة القنفذ (Hh) بتركيز مثبط متوسط (IC50) أقل من 10 ميكرومتر
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 302803-72-1
Sample solution is provided at 25 µL, 10mM.
Ciliobrevin A is a hedgehog (Hh) signaling pathway inhibitor with median inhibitory concentration (IC50) less than 10 μM.
Ciliobrevin A (HPI-4) also prevents an increase in the FLAG-Gli2 full-length/repressor ratio upon Shh stimulation, but HPI-2 and HPI-3 have no significant effect. Ciliobrevin A decreases FLAG-Gli1 stability in these cells, revealing another mechanism by which this small molecule can inhibit Hh target gene expression, while neither HPI-2 or HPI-3 has any significant effect on FLAG-Gli1 levels. Ciliobrevin A increases ciliary levels of FLAG-Gli2 in a manner disproportionate to their effects on total FLAG-Gli2 levels. In addition, Shh-EGFPFLAG-Gli2 cells cultured with Ciliobrevin A have truncated primary cilia, and this cellular organelle is absent in a significant fraction of Ciliobrevin A-treated cells. Ciliobrevin A also perturbs primary cilia formation in the Shh-LIGHT2FLAG-Gli1 cells and promotes accumulation of FLAG-Gli1 at the distal tip of this organelle. Ciliobrevin A significantly inhibits the proliferation of these neuronal progenitors, as measured by histone H3 phosphorylation (pH3) levels, and reduces cellular levels of cyclin D1 protein and Gli1, Gli2, and N-Myc transcripts in the CGNPs. Ciliobrevin A can block the proliferation of SmoM2-expressing CGNPs and should be equally potent against CGNPs lacking Su(fu) function, whereas the Smo inhibitor Cyclopamine is ineffective against either oncogenic lesion[1].
References:
[1]. Hyman JM, et al. Small-molecule inhibitors reveal multiple strategies for Hedgehog pathway blockade. Proc Natl Acad Sci U S A. 2009 Aug 18;106(33):14132-7.
Kinase experiment: |
Smo-binding assays are conducted with BODIPY-cyclopamine and Smo-overexpressing HEK 293T cells, using a CMVpromoter-based SV40 origin-containing expression construct for Smo-Myc3 (murine Smo containing three consecutive Myc epitopes at the C terminus). HEK 293T cells are seeded into eight-well chambered coverslips (80,000 cells/well) and cultured in DMEM containing 10% FBS, 100 U/mL penicillin, and 0.1 mg/mL streptomycin. The cells are cultured until they reached 55 to 65% confluency (14-18 h), after which they are transfected with the Smo-Myc3 expression construct and Transit-LT1. Twenty-four hours after transfection, the cells are washed with PBS and cultured in DMEM containing 0.5% FBS, 5 nM BODIPY-cyclopamine, and various concentrations of either cyclopamine or individual HPIs. After 30 min, 10 μM Hoescht 33342 is added to each well, and the HPIs are incubated with the cells for an additional 30 min. The cells are then washed two times with PBS buffer, once with phenol red-free DMEM containing 0.5% FBS, and immediately imaged using a DMI6000B compound microscope. Images are background-substracted using ImageJ software with a rolling ball size of 75 pixels, and BODIPY-cyclopamine intensity is then determined using Metamorph software. Circular regions with a diameter of 300 pixels are placed over regions containing uniformly confluent cells, and the pixel intensities of approximately 20 regions from four independent images is used to determine the average BODIPY-cyclopamine levels for each experimental condition[1]. |
Cell experiment: |
NIH 3T3 cells are seeded into 24-well plates (40,000 cell/well) containing polyD-lysine-coated 12-mm glass coverslips and cultured in DMEM containing 10% CS, 100 U/mL penicillin, and 0.1 mg/mL streptomycin until they reached 85-90% confluency. The medium is changed to DMEM containing 0.5% CS, 100 U/mL penicillin, and 0.1 mg/mL streptomycin and the cells are cultured for another 12 h. The cells are then treated with either DMSO, 3 μM cyclopamine,15 μM HPI-1, 20 μM HPI-2, 30 μM HPI-3, or 30 μM Ciliobrevin A. Shh-N-conditioned medium is added to appropriate wells at a final concentration of 5%. After 12 h, the cells are fixed in 4% paraformaldehyde for 10 min at room temperature, washed three times with PBS, permeabilized for 1 min with PBS containing 0.1% Triton X-100, washed again three times with PBS, and then blocked with PBS containing 1% normal goat serum for 3 h. The coverslips are then treated with mouse anti-N-acetylated-α-tubulin (1:1,000 in blocking buffer) and rabbit anti-Smo antibody (6) (1:2,000 dilution in blocking buffer) for 2 h at room temperature and washed 3×5 min with PBS. The coverslips are incubated next with Alexa Fluor 594-conjugated goat anti-mouse IgG and Alexa Fluor 488-conjugated donkey anti-rabbit IgG antibodies (1:1,000 dilutions in blocking buffer) for 1 h at room temperature. After washes with PBS and a 5-min incubation with 4,6-diamidino-2-phenylindole (DAPI), the samples are mounted using Prolong Gold and imaged with an inverted Leica DMIRE2 laser scaning confocal microscope[1]. |
References: [1]. Hyman JM, et al. Small-molecule inhibitors reveal multiple strategies for Hedgehog pathway blockade. Proc Natl Acad Sci U S A. 2009 Aug 18;106(33):14132-7. |
Cas No. | 302803-72-1 | SDF | |
المرادفات | HPI-4 | ||
Chemical Name | (2E)-3-(2,4-dichlorophenyl)-3-oxo-2-(4-oxo-1H-quinazolin-2-ylidene)propanenitrile | ||
Canonical SMILES | C1=CC=C2C(=C1)C(=O)NC(=C(C#N)C(=O)C3=C(C=C(C=C3)Cl)Cl)N2 | ||
Formula | C17H9Cl2N3O2 | M.Wt | 358.18 |
الذوبان | DMF: 20 mg/mL,DMSO: 20 mg/mL,DMSO:PBS (pH 7.2) (1:1): 0.5 mg/mL | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
1 mg | 5 mg | 10 mg | |
1 mM | 2.7919 mL | 13.9595 mL | 27.9189 mL |
5 mM | 0.5584 mL | 2.7919 mL | 5.5838 mL |
10 mM | 0.2792 mL | 1.3959 mL | 2.7919 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 34 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *