الصفحة الرئيسية>>Signaling Pathways>> Others>>ML 281

ML 281

رقم الكتالوجGC11380 Copy One-Click Copy Product Info

ML 281 هو مثبط قوي وانتقائي STK33 مع IC50 من 14 نانومتر.

Products are for research use only. Not for human use. We do not sell to patients.

ML 281 التركيب الكيميائي

Cas No.: 1404437-62-2

الحجم السعر المخزون الكميّة
10mM (in 1mL DMSO)
64٫00
متوفر
1mg
33٫00
متوفر
5mg
74٫00
متوفر
10mg
108٫00
متوفر
25mg
198٫00
متوفر
50mg
317٫00
متوفر
100mg
449٫00
متوفر

Tel:(909) 407-4943 Email: sales@glpbio.com


مراجعات العميل

بناء على آراء العملاء.

Sample solution is provided at 25 µL, 10mM.



Description of ML 281

ML281 is a potent and selective STK33 inhibitor with IC50 of 14 nM. ML281 showed a 550-fold selectivity over AurB and greater than 700-fold selectivity over PKA.target: STK33IC50: 14 nM [1]ML281 showed low nanomolar inhibition of purified recombinant STK33 and a distinct selectivity profile as compared to other STK33 inhibitors. Even at the highest concentration tested (10 μM), ML281 had no effect on the viability of KRAS-dependent cancer cells. [2]

ML281 (10 μM; 72 hours) suppresses cell viability of NCI-H446 cells[3].

References:
[1]. We wer M et al. A Potent and Selective Quinoxalinone-Based STK33 Inhibitor Does Not Show Synthetic Lethality in KRAS-Dependent Cells. ACS Med Chem Lett, 2012 Dec 13, 3(12):1034-1038.
[2]. Sun EL, et al. Knockdown of human serine/threonine kinase 33 suppresses human small cell lung carcinoma by blocking RPS6/BAD signaling transduction. Neoplasma. 2017;64(6):869-879.
[3]. Spoonamore J et al. Screen for Inhibitors of STK33 Kinase Activity. National Center for Biotechnology Information (US); 2010-2011 Dec 16.

Chemical Properties of ML 281

Cas No. 1404437-62-2 SDF
Chemical Name N-(4-isopropyl-2-(3-oxo-3,4-dihydroquinoxalin-2-yl)phenyl)thiophene-2-carboxamide
Canonical SMILES CC(C1=CC(C2=NC3=CC=CC=C3NC2=O)=C(NC(C4=CC=CS4)=O)C=C1)C
Formula C22H19N3O2S M.Wt 389.47
الذوبان DMF: 33 mg/ml,DMF:PBS (pH 7.2) (1:4): 0.2 mg/ml,DMSO: 20 mg/ml Storage Store at -20°C
General tips Please select the appropriate solvent to prepare the stock solution according to the solubility of the product in different solvents; once the solution is prepared, please store it in separate packages to avoid product failure caused by repeated freezing and thawing.Storage method and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored at -20°C, please use it within 1 month.
To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time.
Shipping Condition Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request.

Complete Stock Solution Preparation Table of ML 281

Prepare stock solution
1 mg 5 mg 10 mg
1 mM 2.5676 mL 12.838 mL 25.6759 mL
5 mM 513.5 μL 2.5676 mL 5.1352 mL
10 mM 256.8 μL 1.2838 mL 2.5676 mL
  • حاسبة المولارية

  • حاسبة التخفيف

  • Molecular Weight Calculator

كتلة
=
تركيز
x
مقدار
x
ميغاواط *
 
 
 
** عند إعداد حلول المخزون، دائمًا استخدم الوزن الجزيئي الخاص بالدفعة للمنتج على ملصق القارورة MSDS / CoA (متوفر عبر الإنترنت).

احسب

In vivo Formulation Calculator (Clear solution) of ML 281

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

mg/kg g μL

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO % % Tween 80 % saline
%DMSO %

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.

Product Documents

Quality Control & SDS

View current batch:

مراجعات

Review for ML 281

Average Rating: 5 ★★★★★ (Based on Reviews and 7 reference(s) in Google Scholar.)

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%