Phalloidin-TFAX 488

This plan only provides a guide, please modify it to meet your specific needs.

1. Prepare dyeing solution

(1) Dye stock solution: Take the lyophilized powder stored at low temperature and return it to room temperature for at least 20 minutes. After centrifugation at low speed, add methanol or anhydrous DMSO to fully dissolve it to prepare a 10-100 μM stock solution. The prepared stock solution should be aliquoted and stored in the dark at -20 or -80°C;

(2) Dye working solution: It is recommended to use PBS (the PBS used in this solution is 1xPBS with pH 7.4) to dilute the stock solution and prepare a working solution with a concentration of 10-200nM.

Notice:

① Please adjust and optimize the working fluid concentration according to the actual situation, and prepare it now.

② A PBS dilution stock solution containing 1% BSA can be used to reduce non-specific background staining and minimize the possibility of phalloidin adhering to the tube wall.

2. Cell staining

(1) Cells are cultured on slides and grown to reach 70-80% confluence.

(2) Aspirate the culture medium and wash the cells twice with 37°C preheated PBS.

(3) Fix the cells with 4% paraformaldehyde dissolved in PBS and fix at room temperature for 10 minutes.

Notice:

① Methanol can destroy actin during the fixation process. It is recommended to use methanol-free fixative;

② Cells can also be fixed in PBS containing 3-4% formalin at room temperature for 10-30 minutes.

(4) Wash cells 2-3 times with PBS at room temperature, 30 seconds each time.

Optional step ①: Treat cells with PBS containing 10 mM ethanolamine (or 0.1 M glycine) for 5 minutes to quench excess formalin;

Optional step ②: Add PBS containing 0.1% Triton X-100 to the fixed cells, let stand for 3-5 minutes to increase permeability, and then wash the cells 2-3 times with PBS.

(5) Take about 100 μl of the freshly prepared staining working solution to completely cover the cells on the coverslip, and incubate at room temperature in the dark for 30 minutes.

Notice:

① Generally, 4℃-37℃ is suitable for dyeing. In order to avoid evaporation of the working solution, place the coverslip in a sealed container during the incubation process;

② If necessary, a nuclear staining solution with a different fluorescence spectrum than TFAX 488 can be added at this time.

(6) Wash cells 2-3 times with PBS at room temperature, 30 seconds each time.

(7) Use filter paper to absorb as much liquid as possible on the cell surface, place the coverslip upside down on a glass slide with a drop of anti-fluorescence quenching agent, gently absorb the excess quenching agent with a paper towel, and then seal the coverslip with transparent nail polish All around. F-actin staining can still be maintained if the slides treated by this method are stored at 4°C in the dark for at least 6 months.

(8) Observe the staining results under a fluorescence microscope. The maximum excitation/emission light of Phalloidin-TFAX 488 is 490/520nm.

Precautions:

① Cells can be stained in cell culture plates/copolymer dishes. Step (7) is changed to adding anti-fluorescence quenching agent dropwise into the wells to protect fluorescence;

② Phalloidin staining is not suitable for cells fixed with methanol or acetone. Such fixatives will destroy the structure of actin and prevent phalloidin from staining. It is recommended to use 0.2% glutaraldehyde to fix cells;

③ Phalloidin is sensitive to pH: If the pH value increases, the key thioether bridge in phalloidin will be cleaved, thereby losing its affinity for actin;

④ Phalloidin staining can be used in conjunction with antibody staining. It is recommended to add phalloidin conjugate during the incubation with primary or secondary antibodies;

⑤ The optimal concentration and incubation time of phalloidin conjugate depends on the specific cell type, fixation/sample preparation conditions, and/or cell/tissue permeability to the probe;

⑥ Suspension cells can be attached to poly-D-lysine microplates or coverslips, and then stained using the adherent cell protocol;

⑦ If the cell condition is poor, it is recommended to add serum (2-10%) to the staining solution and washing solution;

⑧ In some cases, a one-step method can be used for rapid phalloidin staining: 3.7% formalin and 50-100µg/mL palmitoyl lysophosphatidylcholine coupled with phalloidin at 4°C. Incubate in the conjugate for 20 minutes, then wash 3 times and mount;

⑨ When staining in unfixed samples, phalloidin binding reduces the rate of dissociation of actin subunits from actin filament ends, thereby stabilizing actin filaments by preventing actin filament depolymerization. ;

⑩ For the staining process of other sample types, in order to optimize the fixation conditions and facilitate staining, it is recommended to change the fixation time and formalin concentration within a certain range;

⑪ Phalloidin can be used for formalin-fixed and permeabilized tissue sections, cell cultures and other sample types as well as cell-free experiments. It can also be used for dewaxed paraffin-embedded samples, and phalloidin staining is not possible. Antigen retrieval is required;

⑫ The LD50 of phalloidin is 2 mg/kg. Please pay attention to protection when using it. But usually, phalloidin is used in very small amounts and does not pose a significant safety risk;

⑬ Fluorescent dyes all have quenching problems. Please try to avoid light to slow down fluorescence quenching;

For your safety and health, please wear a lab coat and disposable gloves.