Kelex-100 |
カタログ番号GF10451
One-Click Copy Product Info
|
Kelex-100 is a liquid ion exchanger, which can be used for the extraction and pre-concentration of trace metals in seawater.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 73545-11-6
Sample solution is provided at 25 µL, 10mM.
_1-3.$$$39978408@51.jpg');)
_1-9.$$$38538795@65.jpg');)
_1-9.$$$39112701@51.jpg');)
_1-7.$$$37316672@70.jpg');)
_366-372.$$$36198801@70.jpg');)
.$$$38565142@65.jpg');)
_1867-1883.$$$33248023@67.jpg');)
_eads6055.$$$39977546@45.jpg');)
_eadm9805.$$$40080571@45.jpg');)
_eadj3020.$$$39666821@45.jpg');)
_1-20.$$$39757301@28.jpg');)
_1-24.$$$38898113@28.jpg');)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
_1-19.$$$37460805@44.jpg');)
_1291-1307.$$$34518654@46.jpg');)
Kelex-100 is a liquid ion exchanger, which can be used for the extraction and pre-concentration of trace metals in seawater [1]. The gallium can be extracted with an appreciable selectively and yield from alkaline aluminate solutions and the zeolite mother liquor with Kelex 100 [2]. Kelex-100 has been widely used as an adsorbent for the selective separation of germanium from simulated filtrate solutions, and has been employed to prepare various sorbent materials [3].
References:
[1] Ferrarello C N, Bayón M M, Alonso J I G, et al. Comparison of metal pre-concentration on immobilized Kelex-100 and quadruple inductively coupled plasma mass spectrometric detection with direct double focusing inductively coupled plasma mass spectrometric measurements for ultratrace multi-element determinations in sea-water[J]. Analytica chimica acta, 2001, 429(2): 227-235.
[2] Kekesi T. Gallium extraction from synthetic Bayer liquors using Kelex 100-kerosene, the effect of loading and stripping conditions on selectivity[J]. Hydrometallurgy, 2007, 88(1-4): 170-179.
[3] Park H J, Tavlarides L L. Germanium (IV) adsorption from aqueous solution using a Kelex-100 functional adsorbent[J]. Industrial & engineering chemistry research, 2009, 48(8): 4014-4021.
| Cas No. | 73545-11-6 | SDF | |
| Formula | C20H29NO | M.Wt | 299.45 |
| 溶解度 | Storage | 2-8°C, protect from light,away from moisture | |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 3.3395 mL | 16.6973 mL | 33.3946 mL |
| 5 mM | 667.9 μL | 3.3395 mL | 6.6789 mL |
| 10 mM | 333.9 μL | 1.6697 mL | 3.3395 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A liquid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 30 reference(s) in Google Scholar.)