BODIPY 503/512 (Synonyms: BDP FL, 3-BODIPY-Propanoic Acid) |
Catalog No.GC45796 |
BODIPY 503/512는 강력한 형광 염료입니다.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 165599-63-3
Sample solution is provided at 25 µL, 10mM.
GlpBio Products Cited In Reputable Papers
Product Documents
Quality Control & SDS
- View current batch:
- Purity: >95.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Protocol
This plan only provides a guide, please modify it to meet your specific needs.
1. Preparation of staining solution
(1) Prepare stock solution: Dissolve BODIPY 503/512 in DMSO and prepare a stock solution with a concentration of 1-5mM.
Note: Unused stock solution should be aliquoted and stored in the dark at -20°C or -80°C to avoid repeated freezing and thawing.
(2) Prepare working solution: Dilute the stock solution with a suitable buffer (such as serum-free medium or PBS) and prepare a working solution with a concentration of 1-5 μM.
Note: Please adjust the concentration of the working fluid according to the actual situation and prepare it now.
2. Cell suspension staining
(1) Suspension cells: Centrifuge at 1000g for 3-5 minutes at 4°C, discard the supernatant, and wash twice with PBS for 5 minutes each time.
(2) Adherent cells: Wash twice with PBS, add trypsin to digest the cells, and centrifuge at 1000g for 3-5 minutes after digestion is completed.
(3) Add 1 mL of BODIPY 503/512 working solution to resuspend the cells, and incubate at 37 °C in the dark for 5-30 minutes. The optimal incubation time for different cells is different, please explore by yourself according to the specific experimental needs.
(4) After the incubation, centrifuge at 1000g for 5 minutes, remove the supernatant, add PBS and wash 2-3 times, 5 minutes each time.
(5) Resuspend cells in pre-warmed serum-free cell culture medium or PBS and observe by fluorescence microscope or flow cytometry.
3. Cell adhesion staining
(1) Culture adherent cells on sterile coverslips.
(2) Remove the coverslip from the culture medium, suck out the excess culture medium, and place the coverslip in a humid environment.
(3) Add 100 μL of dye working solution from one corner of the coverslip and shake gently to evenly cover all cells with the dye.
(4) Incubate at 37 °C in the dark for 5-30 minutes. The optimal incubation time for different cells is different, please explore by yourself according to the specific experimental needs.
(5) After the incubation, discard the dye working solution and use pre-warmed culture solution to wash the coverslip 2 to 3 times.
4. Microscope detection: The maximum excitation/emission light of BODIPY 503/512 is 503/512 nm respectively.
Precautions:
① It is recommended to set up a positive control. The cells in the control group are incubated with 30 μM oleic acid for 8 hours before subsequent experiments are performed;
② Fluorescent dyes all have quenching problems. Please try to avoid light to slow down fluorescence quenching;
③ For your safety and health, please wear a lab coat and disposable gloves.
Cas No. | 165599-63-3 | SDF | |
Synonyms | BDP FL, 3-BODIPY-Propanoic Acid | ||
Canonical SMILES | CC1=CC(C)=[N]2C1=CC3=CC=C(CCC(O)=O)[N-]3[B+3]2([F-])[F-] | ||
Formula | C14H15BF2N2O2 | M.Wt | 292.1 |
Solubility | Methanol: soluble | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Complete Stock Solution Preparation Table
Prepare stock solution | |||
1 mg | 5 mg | 10 mg | |
1 mM | 3.4235 mL | 17.1174 mL | 34.2349 mL |
5 mM | 0.6847 mL | 3.4235 mL | 6.847 mL |
10 mM | 0.3423 mL | 1.7117 mL | 3.4235 mL |
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Related Products
- GC36102 Galanin Receptor Ligand M35
- GC38014 BT2
- GC33142 MK2-IN-1 (MK2 Inhibitor)
- GC60203 Iodoacetamide-PEG3-azide
- GC34212 Obinutuzumab (GA101)
- GC11736 NF-κB Activation Inhibitor III
- GC10499 PRT062607 Hydrochloride
- GC40443 (±)9-HETE
- GC33730 Pentiapine (CGS 10746)
- GC45414 CRT0066854
- GC40139 β-L-Gulopyranosyl-caldarchaetidyl-glycerol
- GC34618 HO-1-IN-1 hydrochloride
- GC42703 Acetyl β-Endorphin (1-26) (human) (trifluoroacetate salt)
- GC61261 Salcaprozate sodium
- GC38789 GS-6201
- GC38603 Sulfo-SPP
- GC31358 HIF-2α-IN-1
리뷰
Average Rating: 5 ★★★★★ (Based on Reviews and 37 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *