Rigosertib (ON-01910,Estybon) (Synonyms: Rigosertib) |
Catalog No.GC14358
One-Click Copy Product Info
|
Plk1 inhibitor
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1225497-78-8
Sample solution is provided at 25 µL, 10mM.
_1-3.$$$39978408@51.jpg');)
_1-9.$$$38538795@65.jpg');)
_1-9.$$$39112701@51.jpg');)
_1-7.$$$37316672@70.jpg');)
_366-372.$$$36198801@70.jpg');)
.$$$38565142@65.jpg');)
_1867-1883.$$$33248023@67.jpg');)
_eads6055.$$$39977546@45.jpg');)
_eadm9805.$$$40080571@45.jpg');)
_eadj3020.$$$39666821@45.jpg');)
_1-20.$$$39757301@28.jpg');)
_1-24.$$$38898113@28.jpg');)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
_1-19.$$$37460805@44.jpg');)
_1291-1307.$$$34518654@46.jpg');)
Rigosertib (ON-01910,Estybon) is a potent, specific PLK1 inhibitor with IC50 value of 9nM. Rigosertib strongly inhibited the proliferation of cancer cell lines, with observed IC50 values in the nanomolar range for both HeLa (115 nM) and C33A (45 nM) cells. In contrast, rigosertib had a minimal effect on normal cell lines, BJ and Ect1/E6E7 (IC50 > 0.1 mM) [1]
HeLa and C33A cells demonstrated a complete (>95%) G2/M arrest at concentrations of rigosertib >0.5 μM, whereas at <0.2 μM no clear perturbation of the cell cycle was evident. Normal cells were less affected by rigosertib [1].
Rigosertib has been reported to be a more potent radiosensitizer than cisplatin in vivo [1].
Reference:
[1] Agoni L1, Basu I2, Gupta S3, Alfieri A2, Gambino A4, Goldberg GL5, Reddy EP6, Guha C7.Rigosertib is a more effective radiosensitizer than cisplatin in concurrent
chemoradiation treatment of cervical carcinoma, in vitro and in vivo. Int J Radiat Oncol Biol Phys. 2014 Apr 1;88(5):1180-7.
| Kinase experiment [1]: | |
|
In vitro enzyme assays for PLK1 |
Recombinant PLK1 (10 ng) was incubated with different concentrations of Rigosertib in a 15 μL reaction mixture (50 mM HEPES, 10 mM MgCl2, 1 mM EDTA, 2 mM Dithiothreitol, 0.01% NP-40 [pH 7.5]) for 30 mins at room temperature. Kinase reactions were performed for 20 mins at 30 °C in a volume of 20 μL of reaction mixture (15 μL enzyme + inhibitor, 2 μL 1 mM ATP), 2 μL of γ32P-ATP (40 μCi), and 1 μL of recombinant Cdc25C (100 ng) or casein (1 μg) substrates. Reactions were terminated by boiling for 2 mins in 20 μL of 2× Laemmli buffer. Phosphorylated substrates were separated by 18% SDS-PAGE. The gels were dried and exposed to X-ray film for 3 ~ 10 mins. |
| Cell experiment [1]: | |
|
Cell lines |
HeLa cells |
|
Preparation method |
The solubility of this compound in DMSO is > 10 mM. General tips for obtaining a higher concentration: Please warm the tube at 37 °C for 10 minutes and/or shake it in the ultrasonic bath for a while. Stock solution can be stored below - 20 °C for several months. |
|
Reacting condition |
250 nM; 8, 12, 16, 20 or 28 hrs |
|
Applications |
In HeLa cells, Rigosertib significantly inhibited PLK1 activity at all stages of the cell cycle. Moreover, the loss of PLK1 activity was not due to degradation of PLK1 or inhibition of PLK1 synthesis. |
| Animal experiment [1]: | |
|
Animal models |
Nude mice bearing Bel-7402, MCF-7 or MIA-PaCa cell xenografts |
|
Dosage form |
250 mg/kg; i.p. |
|
Applications |
In nude mice bearing Bel-7402, MCF-7 or MIA-PaCa cell xenografts, Rigosertib (250 mg/kg) significantly inhibited tumor growth without obvious toxicity. In addition, Rigosertib completely inhibited PLK1 activity but partially reduced CDK1 activity. |
|
Other notes |
Please test the solubility of all compounds indoor, and the actual solubility may slightly differ with the theoretical value. This is caused by an experimental system error and it is normal. |
|
References: [1]. Gumireddy K, Reddy MV, Cosenza SC, Boominathan R, Baker SJ, Papathi N, Jiang J, Holland J, Reddy EP. ON01910, a non-ATP-competitive small molecule inhibitor of Plk1, is a potent anticancer agent. Cancer Cell. 2005 Mar;7(3):275-86. | |
| Cas No. | 1225497-78-8 | SDF | |
| Synonyms | Rigosertib | ||
| Chemical Name | sodium;2-[2-methoxy-5-[[(E)-2-(2,4,6-trimethoxyphenyl)ethenyl]sulfonylmethyl]anilino]acetate | ||
| Canonical SMILES | COC1=C(C=C(C=C1)CS(=O)(=O)C=CC2=C(C=C(C=C2OC)OC)OC)NCC(=O)[O-].[Na+] | ||
| Formula | C21H24NNaO8S | M.Wt | 473.47 |
| Solubility | ≥ 23.65mg/mL in DMSO | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.1121 mL | 10.5603 mL | 21.1207 mL |
| 5 mM | 422.4 μL | 2.1121 mL | 4.2241 mL |
| 10 mM | 211.2 μL | 1.056 mL | 2.1121 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 15 reference(s) in Google Scholar.)