SR3335 (Synonyms: ML 176) |
| رقم الكتالوجGC12877 |
A selective inverse agonist of RORα
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 293753-05-6
Sample solution is provided at 25 µL, 10mM.
_1-3.$$$39978408@51.jpg');)
_1-9.$$$38538795@65.jpg');)
_1-9.$$$39112701@51.jpg');)
_1-7.$$$37316672@70.jpg');)
_366-372.$$$36198801@70.jpg');)
.$$$38565142@65.jpg');)
_1867-1883.$$$33248023@67.jpg');)
_eads6055.$$$39977546@45.jpg');)
_eadm9805.$$$40080571@45.jpg');)
_eadj3020.$$$39666821@45.jpg');)
_1-20.$$$39757301@28.jpg');)
_1-24.$$$38898113@28.jpg');)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
_1-19.$$$37460805@44.jpg');)
_1291-1307.$$$34518654@46.jpg');)
SR3335 is a synthetic selective inverse agonist of RORα with Ki value of 220 nM [1][2].
The retinoic acid receptor-related orphan receptor α (RORα) is an orphan receptor that plays an important role in the regulation of metabolism.
SR3335 prevented the expression of endogenous RORα in HepG2. And it may suppress hepatic glucose production in type 2 diabetics. SR3335 was able to repress the expression of G6Pase. In ChIP trial, ML-176 reduced the amount of SRC2 at the G6Pase promoter [3]. In a GAL4-RORR ligand binding domain cotransfection assay, SR3335 inhibited the constitutive activity of RORα and the Ki was calculated as 220 nM [1].
When treat diet-induced obese mice with SR3335 (15 mg/kg), after injected with pyruvate, the plasma glucose levels were significantly lower at each time point compared with vehicle-treated animals. The results indicated SR3335 suppressed hepatic gluconeogenesis [1].
References:
[1]. Naresh Kumar, Douglas J. Kojetin, et al. Identification of SR3335 (ML176): a Synthetic RORα Selective Inverse Agonist. ACS Chem Biol. 2011 March 18; 6(3): 218-222.
[2]. Laura A. Solt, Thomas P. Burris. Action of RORs and their ligands in (patho)physiology. Trends in Endocrinology & Metabolism, 2012, 23(12): 619-627.
[3]. Kumar N, Nuhant P, Solt LA, et al. Identification of a novel selective inverse agonist probe and analogs for the Retinoic acid receptor-related Orphan Receptor Alpha (RORα). Probe Reports from the NIH Molecular Libraries Program [Internet], Bethesda (MD): National Center for Biotechnology Information (US),2010-.2010.
Cell experiment: | HEK293 cells are maintained in Dulbecco’s modified Eagle’s medium (DMEM) supplemented with 10% fetal bovine serum at 37°C under 5% CO2. HepG2 cells are maintained and routinely propagated in minimum essential medium supplemented with 10% fetal bovine serum at 37°C under 5% CO2. 24 h prior to transfection, cells are plated in 96-well plates at a density of 15×103 cells/well. Transfections are performed using LipofectamineTM 2000. 16 h post-transfection, the cells are treated with vehicle or SR3335. 24 h post-treatment, the luciferase activity is measured using the Dual-GloTM luciferase assay system. The values indicated represent the means±S.E. from four independently transfected wells. The experiments are repeated at least three times[1]. |
Animal experiment: | Mice[1] 30 week old Diet induced obese (DIO) C57BL/6 male mice are purchased from Jackson Laboratories that are maintained on a 65% Kcal high-fat diet from weaning. DIO mice are treated twice per day (07:00h and 18:00h) with 15 mg/kg SR3335 or vehicle for 6 days i.p. Pyruvate tolerance test is conducted on day 6 of the treatment. Food is removed from mice in the morning after SR3335 injection, fasted for 6 hours and the pyruvate tolerance test is conducted at 13:00h. Time 0 blood glucose is measured taken from the tail nip and the pyruvate challenge is initiated by injection of 2g/kg of pyruvate i.p. followed by measuring blood glucose at 15, 30 and 60 min following the injection. Blood glucose is measured by one touch ultra glucose-meter. |
References: [1]. Kumar N, et al. Identification of SR3335 (ML-176): a synthetic RORα selective inverse agonist. ACS Chem Biol. 2011 Mar 18;6(3):218-22. | |
| Cas No. | 293753-05-6 | SDF | |
| المرادفات | ML 176 | ||
| Chemical Name | N-[4-(1,1,1,3,3,3-hexafluoro-2-hydroxypropan-2-yl)phenyl]thiophene-2-sulfonamide | ||
| Canonical SMILES | C1=CSC(=C1)S(=O)(=O)NC2=CC=C(C=C2)C(C(F)(F)F)(C(F)(F)F)O | ||
| Formula | C13H9F6NO3S2 | M.Wt | 405.34 |
| الذوبان | ≥ 88.8 mg/mL in DMSO, ≥ 87.4 mg/mL in EtOH | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.4671 mL | 12.3353 mL | 24.6706 mL |
| 5 mM | 493.4 μL | 2.4671 mL | 4.9341 mL |
| 10 mM | 246.7 μL | 1.2335 mL | 2.4671 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >99.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 30 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *