HOE-S 785026 trihydrochloride (Synonyms: meta-Hoechst trihydrochloride) |
Catalog No.GC36249 |
HOE-S 785026 trihydrochloride는 청색 형광 염료로 DNA의 세포 염료로 사용할 수 있습니다.
Products are for research use only. Not for human use. We do not sell to patients.
Sample solution is provided at 25 µL, 10mM.
GlpBio Products Cited In Reputable Papers
Product Documents
Quality Control & SDS
- View current batch:
- Purity: >99.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Protocol
This plan only provides a guide, please modify it to meet your specific needs.
1. Prepare Hoechst staining solution
(1) Prepare Hoechst dye stock solution: Use DMSO to dissolve solid and prepare a 10 mg/mL Hoechst dye stock solution.
Note: Hoechst stock solution is recommended to be aliquoted and stored in the dark at -4°C or -20°C to avoid repeated freezing and thawing.
(2) Working solution preparation: Use preheated serum-free medium or buffer (such as HBSS or PBS) to dilute the stock solution and prepare a Hoechst working solution with a concentration of 10 μg/mL.
Note: Please adjust the concentration of Hoechst working fluid according to the actual situation and prepare it immediately.
2. Cell staining
2.1 Suspension cells (taking 6-well plate as an example)
(1) Centrifuge suspended cells at 1000g for 3-5 minutes. Discard the supernatant and wash twice with PBS for 5 minutes each time.
(2) Add 1 mL of Hoechst dye working solution and incubate at room temperature in the dark for 5-10 minutes.
(3) After the incubation, centrifuge at 1000g for 5 minutes, remove the supernatant, add PBS and wash 2-3 times, 5 minutes each time.
(4) Use serum-free cell culture medium or PBS to resuspend the cells and observe them through fluorescence microscopy or flow cytometry.
2.2 Adherent cells
(1) Culture adherent cells on sterile coverslips.
(2) Remove the coverslip from the culture medium, suck out the excess culture medium, and place the coverslip in a humid environment.
(3) Add 100μL of Hoechst dye working solution from one corner of the coverslip, shake gently to evenly cover all cells with the dye, and incubate at room temperature in the dark for 5-15 minutes.
(4) Aspirate away the dye working solution, wash the coverslip 2 to 3 times with culture solution, and observe with a fluorescence microscope.
3.Fluorescence microscopy detection: The maximum excitation/emission wavelength of HOE-S 785026 is 356/451nm.
Precautions:
1) Fluorescent dyes all have quenching problems. Please avoid light as much as possible to slow down fluorescence quenching.
2) For your safety and health, please wear a lab coat and disposable gloves.
HOE-S 785026 trihydrochloride is a blue fluorescent dyes, which can be used as a cell dye for DNA.
Hoechst stains are part of a family of blue fluorescent dyes used to stain DNA. HOES 785026 is a Hoechst stains are part of a family of blue fluorescent dyes used to stain DNA.
Cas No. | SDF | ||
Synonyms | meta-Hoechst trihydrochloride | ||
Canonical SMILES | OC1=CC=CC(C2=NC3=CC(C4=NC5=CC(N6CCN(C)CC6)=CC=C5N4)=CC=C3N2)=C1.[H]Cl.[H]Cl.[H]Cl | ||
Formula | C25H27Cl3N6O | M.Wt | 533.88 |
Solubility | Water: 47.3 mg/mL (88.60 mM and warming) | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Complete Stock Solution Preparation Table
Prepare stock solution | |||
1 mg | 5 mg | 10 mg | |
1 mM | 1.8731 mL | 9.3654 mL | 18.7308 mL |
5 mM | 0.3746 mL | 1.8731 mL | 3.7462 mL |
10 mM | 0.1873 mL | 0.9365 mL | 1.8731 mL |
In vivo Formulation Calculator (Clear solution)
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Related Products
- GC34742 Protosappanin A
- GC12855 Apramycin Sulfate
- GC10032 SR 144528
- GC10348 Alendronate sodium hydrate
- GN10241 5-Methoxypsoralen
- GC12317 FITC, Fluorescein isothiocyanate
- GC43843 Histone H3K27Ac (23-34) (human, mouse, rat, bovine) (trifluoroacetate salt)
- GC60501 3-Hydroxy-4-aminopyridine
- GC11745 S-(2-aminoethyl) Isothiourea (dihydrobromide)
- GC31706 Ginsenoside Rg5
- GC50486 Dynarrestin
- GC50074 T2AA
- GC15726 NNGH
- GN10530 cis-Anethol
- GC11321 PRT-060318
- GC50295 TL4-12
- GC31406 FAS-IN-1
리뷰
Average Rating: 5 ★★★★★ (Based on Reviews and 8 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *