This plan only provides a guide, please modify it to meet your specific needs.
1. Prepare Green DND-26 staining solution
(1) Take out the frozen dyeing solution, return it to room temperature, and concentrate the dyeing solution at the bottom of the tube by instant centrifugation.
(2) Preparation of working solution: Dilute the stock solution with a suitable buffer (such as serum-free medium or PBS) to prepare a working solution with a concentration of 50-75 nM.
Notice:
① Please adjust the concentration of the working fluid according to the actual situation and make it ready for use;
② In order to reduce false positives caused by excessive background or overload, the concentration of the dye should be as low as possible.
2. Cell suspension staining
(1) Suspension cells: Centrifuge the suspended cells at 4°C and 1000g for 3-5 minutes, discard the supernatant, and wash twice with PBS for 5 minutes each time.
(2) Adherent cells: Wash twice with PBS, add trypsin to digest the cells, and centrifuge at 1000g for 3-5 minutes after digestion is completed.
(3) Resuspend approximately 106 cells in 0.5-1mL working solution and incubate at 37°C in the dark for 30 minutes to 2 hours. The optimal incubation time for different cells is different, please explore by yourself according to the specific experimental needs.
(4) After the incubation, centrifuge at 1000g for 5 minutes, remove the supernatant, and add PBS to wash 2-3 times, 5 minutes each time.
(5) Use pre-warmed cell culture medium to resuspend and incubate the cells.
3. Cell adhesion staining
(1) Culture adherent cells on sterile coverslips.
(2) Remove the coverslip from the culture medium, aspirate the excess culture medium, and place the coverslip in a humid environment.
(3) Add 100uL of dye working solution from one corner of the coverslip and shake gently to evenly cover all cells with the dye.
(4) Incubate at 37°C in the dark for 30 minutes to 2 hours. The optimal incubation time for different cells is different, please explore by yourself according to the specific experimental needs.
(5) After the incubation, discard the dye working solution, add PBS to wash 2-3 times, and use pre-warmed culture medium to incubate the cells.
4. Fluorescence detection: The maximum absorption/emission light of Green DND-26 is 504/511nm.
Precautions:
1. Fluorescent dyes all have quenching problems. Please avoid light as much as possible to slow down fluorescence quenching.
2. For your safety and health, please wear a lab coat and disposable gloves.
;)
,-1-7$$$37316672.jpg');)
;)
;)
$$$36806353.jpg');)
;33(7)%EF%BC%9A546-561$$$37156877.jpg');)
;)
;)
;)
%201124-1138.$$$35908550.jpg');)
%20766-780.$$$37100057.jpg');)
%20418-432.$$$36893736.jpg');)
%EF%BC%9A-240-255.$$$35108512.jpg');)
533-545$$$36543525.jpg');)
%201-13.$$$36600053.jpg');)
;)
