MQA-P |
|
Katalog-Nr.GC71076
|
MQA-P ist eine multifunktionale Nahinfrarot (NIR) Fluoreszenzsonde zur gleichzeitigen Detektion von ONOO-, Viskosität und Polarität innerhalb von Mitochondrien.
Products are for research use only. Not for human use. We do not sell to patients.
Sample solution is provided at 25 µL, 10mM.
Guidelines (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs).
1. MQA-P is dissolved in dimethyl sulfoxide (DMSO) to prepare a stock solution (1.0 mM).
2. For imaging of ONOO- in live cells.
HeLa cells are incubated with MQA-P (5 μM) for 30 min as control; pretreated with SIN-1 for 30 min and then incubated with MQA-P (5 μM) for another 30 min. The fluorescence images are obtained on a confocal laser scanning microscope with a green channel (λex= 405nm, λem= 550-670 nm).
3. For imaging of viscosity in live cells.
HeLa cells were incubated with MQA-P (5 μM) for 30 min as control; pretreated with Monensin for 30 min and then incubated with MQA-P (5 μM) for another 30min. The fluorescence images are obtained on a confocal laser scanning microscope with a red channel (λex= 561 nm, λem= 680-750 nm).
4. For dual-channel imaging of ONOO-, viscosity and polarity during ferroptosis.
HeLa cells are incubated with MQA-P (5 μM) for 30 min as control; pretreated with Erastin for 30 min and then incubated with MQA-P (5 μM) for another 30 min. The fluorescence images are obtained on a confocal laser scanning microscope with a green channel (λex= 405nm, λem= 550-670 nm) for ONOO- and a red channel (λex= 561 nm, λem= 680-750 nm) for viscosity and polarity[1].
Guidelines (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs).
1. For tissue slices imaging, the normal organs (including heart, liver, spleen, lung, and kidney) and tumor are isolated from the mice, then sectioned as 5 μm thicknesses, respectively.
2. These slices are incubated with MQA-P (20 μM) for 30 min, then washed with PBS (pH 7.4) three times, and finally subjected to in vivo imaging using a confocal laser scanning microscope with a green channel (λex=405nm, λem=550-670 nm) for ONOO- and a red channel(λex=561 nm, λem=680-750 nm) for viscosity and polarity, respectively[1].
References:
[1]. Li Fan, et al. Multifunctional Fluorescent Probe for Simultaneous Detection of ONOO-, Viscosity, and Polarity and Its Application in Ferroptosis and Cancer Models. Anal Chem. 2023 Apr 4;95(13):5780-5787.
| Cas No. | SDF | ||
| Formula | C40H36BrN2O2P | M.Wt | 687.6 |
| Löslichkeit | Storage | ||
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 1.4543 mL | 7.2717 mL | 14.5433 mL |
| 5 mM | 290.9 μL | 1.4543 mL | 2.9087 mL |
| 10 mM | 145.4 μL | 727.2 μL | 1.4543 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 30 reference(s) in Google Scholar.)















