SAE-14 (Synonyms: GPR183 antagonist-1) |
Katalog-Nr.GC65986 |
SAE-14 (Verbindung SAE-14) ist ein potenter, spezifischer GPR183-Antagonist mit einem IC50-Wert von 28,5 nM, kann &77#945;, 25-OHC-induzierte Kalziummobilisierung mit einem IC50-Wert unter 50 nM in HL-60-Zellen antagonisieren. GPR183-Antagonist-1 kann Allodynie bei MÄusen umkehren.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1241280-25-0
Sample solution is provided at 25 µL, 10mM.
IC50: 28.5 nM (GPR183)[1]
SAE-14 (compound SAE-14) is a potent, specific GPR183 antagonist with an IC50 value of 28.5 nM, can antagonize 7α, 25-OHC-induced calcium mobilization with IC50 value below 50 nM in HL-60 cells. GPR183 antagonist-1 can reverse allodynia in mice[1].
SAE-14 (compound SAE-14) can able to antagonize 7α, 25-OHC-induced calcium mobilization with an IC50 value below 50 nM[1].
Cell Viability Assay[1]
Cell Line: | The human leukemia (HL)-60 cells |
Concentration: | 5×of the antagonist |
Incubation Time: | 15 min |
Result: | Had GPR183-specific (IC50: 28.5nM) and abolished 7a, 25-OHC-induced calcium mobilization in the HL-60 cells. |
SAE-14 (compound SAE-14) (i.th.; 2.9 µM; once) can reverse nerve injury-induced allodynia in mice[1].
Animal Model: | Male and female ICR mice[1] |
Dosage: | 2.9 µM |
Administration: | intrathecal (i.th.) injections; 2.9 µM; once |
Result: | Reversed CCI-induced mechanical allodynia in a time-dependent manner. |
Cas No. | 1241280-25-0 | SDF | |
Überlieferungen | GPR183 antagonist-1 | ||
Formula | C19H19F3N2O2 | M.Wt | 364.36 |
Löslichkeit | DMSO : 100 mg/mL (274.45 mM; ultrasonic and warming and heat to 60°C) | Storage | Store at -20°C |
General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. |
Prepare stock solution | |||
![]() |
1 mg | 5 mg | 10 mg |
1 mM | 2.7445 mL | 13.7227 mL | 27.4454 mL |
5 mM | 0.5489 mL | 2.7445 mL | 5.4891 mL |
10 mM | 0.2745 mL | 1.3723 mL | 2.7445 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5
(Based on Reviews and 30 reference(s) in Google Scholar.)GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *