1H,1H,2H,2H-Perfluorododecyltrichlorosilane |
| Catalog No.GD14910 |
1H,1H,2H,2H-Perfluorododecyltrichlorosilane is a fluorinated silane that exhibits unique surface modification properties due to its highly fluorinated long carbon chain and reactive trichlorosilane groups.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 102488-49-3
Sample solution is provided at 25 µL, 10mM.
1H,1H,2H,2H-Perfluorododecyltrichlorosilane is a fluorinated silane that exhibits unique surface modification properties due to its highly fluorinated long carbon chain and reactive trichlorosilane groups. The silane group of 1H,1H,2H,2H-Perfluorododecyltrichlorosilane is covalently bonded to the surface, thereby forming a self-assembled monolayer. This monolayer significantly reduces the wettability of the surface, making it resistant to water and oily substances. 1H,1H,2H,2H-Perfluorododecyltrichlorosilane can be used to prepare hydrophobic surfaces and can also be incorporated into polyvinylidene fluoride (PVDF) membranes together with titanium dioxide (TiO2) for water treatment and pollution prevention (membrane distillation) [1-3].
References:
[1] Horning M P, Delahunt C B, Singh S R, et al. A paper microfluidic cartridge for automated staining of malaria parasites with an optically transparent microscopy window[J]. Lab on a chip, 2014, 14(12): 2040-2046.
[2] Meng S, Mansouri J, Ye Y, et al. Effect of templating agents on the properties and membrane distillation performance of TiO2-coated PVDF membranes[J]. Journal of membrane science, 2014, 450: 48-59.
[3] Ebrahimi F, Orooji Y, Razmjou A. Applying membrane distillation for the recovery of nitrate from saline water using pvdf membranes modified as superhydrophobic membranes[J]. Polymers, 2020, 12(12): 2774.
| Cas No. | 102488-49-3 | SDF | |
| Formula | C12H4Cl3F21Si | M.Wt | 681.57 |
| Solubility | Storage | Store at 2-8°C | |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 1.4672 mL | 7.336 mL | 14.672 mL |
| 5 mM | 0.2934 mL | 1.4672 mL | 2.9344 mL |
| 10 mM | 0.1467 mL | 0.7336 mL | 1.4672 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >97.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 30 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *