GNE-049 |
| Catalog No.GC32960 |
GNE-049 is a highly potent and selective CBP inhibitor with an IC50 of 1.1 nM in TR-FRET assay. GNE-049 also inhibits BRET and BRD4(1) with IC50s of 12 nM and 4200 nM, respectively.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1936421-41-8
Sample solution is provided at 25 µL, 10mM.
;)
,-1-7$$$37316672.jpg');)
;)
;)
$$$36806353.jpg');)
;33(7)%EF%BC%9A546-561$$$37156877.jpg');)
;)
;)
;)
%201124-1138.$$$35908550.jpg');)
%20766-780.$$$37100057.jpg');)
%20418-432.$$$36893736.jpg');)
%EF%BC%9A-240-255.$$$35108512.jpg');)
533-545$$$36543525.jpg');)
%201-13.$$$36600053.jpg');)
;)
GNE-049 is a highly potent and selective CBP inhibitor with an IC50 of 1.1 nM in TR-FRET assay. GNE-049 also inhibits BRET and BRD4(1) with IC50s of 12 nM and 4200 nM, respectively.
GNE-049 is selected for further profiling as it has the best balance of liver microsomes (LM) stability, selectivity, and cellular potency GNE-049 has excellent potency in the BRET cellular assay and, in an orthogonal measure of the target engagement, GNE-049 is shown to inhibit the expression of MYC (MV4-11 cell line) with an EC50 of 14 nM[1].
GNE-049 demonstrates acceptable PK in mouse, rat, dog, and monkey. Determination of potency versus a selection of bromodomains revealed that GNE-049 is selective for CBP/P300 and, importantly, quite selective (3820-fold) over BRD4(1). GNE-049 is further evaluated in a rat single dose (30-250 mg/kg QD) toxicokinetic study. Adverse central nervous system (CNS)-related signs (e.g., marked hyperactivity and vocalization) are observed in several of the rats at the 250 mg/kg dose level. Furthermore, at the 250 mg/kg dose level, the ratio of the unbound drug concentration in brain to unbound drug concentration in plasma (Kp,uu) 3 h post dose is determined to be 0.43, indicating that GNE-049 is penetrating into the CNS and potentially resulting in the observed toxicity[1].
[1]. Romero FA, et al. GNE-781, A Highly Advanced Potent and Selective Bromodomain Inhibitor of Cyclic Adenosine Monophosphate Response Element Binding Protein, Binding Protein (CBP). J Med Chem. 2017 Nov 22;60(22):9162-9183.
Animal experiment: | Mice[1]Twelve female CD-1 mice are used. All animals are 6-9 weeks old at the time of study and weighed between 20 and 35 g. Animals (n=3 per dosing route) are dosed with GNE-049 or GNE-781 at 1 mg/kg iv (in propyl ethylene glycol 400 (35% v/v) and water (65% v/v)) or 5 mg/kg po (suspended in 0.5% w/v methylcellulose, 0.2% w/v Tween 80). Food and water are available ad libitum to all animals. Serial blood samples (15 μL) are collected by tail nick at 0.033, 0.083, 0.25, 0.5, 1, 3, 8, and 24 h after the intravenous administration and 0.083, 0.25, 0.5, 1, 3, 8, and 24 h after the oral administration. All blood samples are diluted with 60 μL of water containing 1.7 mg/mL EDTA and kept at -80 °C until analysis[1].Rats[1]Twelve male Sprague-Dawley rats are used. All animals are 6-9 weeks old at the time of study and weighed between 200 and 300 g. Animals (n=3 per dosing route) are dosed with GNE-049 or GNE-781 at 1 mg/kg iv (in propyl ethylene glycol 400 (35% v/v) and water (65% v/v)) or 5 mg/kg po (suspended in 0.5% w/v methylcellulose, 0.2% w/v Tween 80). Food and water are available ad libitum to animals in the iv groups. Animals in po groups are fasted overnight and food withheld until 4 h postdose. Approximately 250 μL of blood are collected via the catheter at 0.033, 0.083, 0.25, 0.5, 1, 2, 4, 8, and 24 h after the intravenous or oral administration. All blood samples are collected into tubes containing 5 μL of 0.5 M K2EDTA and processed for plasma. Samples are centrifuged (2500g for 15 min at 4°C) within 1 h of collection, and plasma samples are kept at -80 °C until analysis[1]. |
References: [1]. Romero FA, et al. GNE-781, A Highly Advanced Potent and Selective Bromodomain Inhibitor of Cyclic Adenosine Monophosphate Response Element Binding Protein, Binding Protein (CBP). J Med Chem. 2017 Nov 22;60(22):9162-9183. | |
| Cas No. | 1936421-41-8 | SDF | |
| Canonical SMILES | CC(N1CCC(N(C2CCOCC2)N=C3N4CCCC5=C4C=C(C(F)F)C(C6=CN(C)N=C6)=C5)=C3C1)=O | ||
| Formula | C27H32F2N6O2 | M.Wt | 510.58 |
| Solubility | DMSO : 150 mg/mL (293.78 mM) | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 1.9586 mL | 9.7928 mL | 19.5856 mL |
| 5 mM | 0.3917 mL | 1.9586 mL | 3.9171 mL |
| 10 mM | 0.1959 mL | 0.9793 mL | 1.9586 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 32 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *