CF53 |
| Catalog No.GC33028 |
CF53 is a highly potent, selective and orally active inhibitor of BET protein, with a Ki of <1 nM, Kd of 2.2 nM and an IC50 of 2 nM for BRD4 BD1. CF53 binds to both the BD1 and BD2 domains of BRD2, BRD3, BRD4, and BRDT BET proteins with high affinities, very selective over non-BET bromodomain-containing proteins. CF53 shows potent anti-tumor activity both in vitro and in vivo.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1808160-52-2
Sample solution is provided at 25 µL, 10mM.
;)
_1-7.$$$37316672@70.jpg');)
;)
;)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
;)
;)
;)
_1124-1138.$$$35908550@30.jpg');)
_766-780.$$$37100057@30.jpg');)
_418-432.$$$36893736@30.jpg');)
_240-255.$$$35108512@29.jpg');)
_533-545.$$$36543525@28.jpg');)
_264-276.$$$36600053@22.jpg');)
_2214998.$$$@0.jpg');)
CF53 is a highly potent, selective and orally active inhibitor of BET protein, with a Ki of <1 nM, Kd of 2.2 nM and an IC50 of 2 nM for BRD4 BD1. CF53 binds to both the BD1 and BD2 domains of BRD2, BRD3, BRD4, and BRDT BET proteins with high affinities, very selective over non-BET bromodomain-containing proteins. CF53 shows potent anti-tumor activity both in vitro and in vivo[1].
CF53 (Compound 28) binds to both the BD1 and BD2 domains of BRD2, BRD3, BRD4, and BRDT BET proteins with high affinities, Kds are 1.1 nM (BRD2 BD1), 0.6 nM (BRD2 BD2), 0.52 nM (BRD3 BD1), 0.49 nM (BRD3 BD2), 0.8 nM (BRD4 BD2), 2 nM (BRDT BD1), 2.1 nM (BRDT BD2), 47 nM (CREBBP), 570 nM (CECR2), 110 nM (EP300), respectively[1].CF53 exhibits IC50s of 7, 85 nM against MOLM-13 acute leukemia and MDA-MB-231 breast cancer cell lines, respectively[1].
CF53 (25, 50 mg/kg, p.o.) exhibits potent anti-tumor activity both in MDA-MB-231 xenograft tumor model and in RS4;11 model in mice[1].
[1]. Zhao Y, et al. Structure-Based Discovery of CF53 as a Potent and Orally Bioavailable Bromodomain and Extra-Terminal (BET) Bromodomain Inhibitor. J Med Chem. 2018 Jul 26;61(14):6110-6120.
| Cas No. | 1808160-52-2 | SDF | |
| Canonical SMILES | COC1=C(C2=C(C)ON=C2C)C=C(NC3=C4C(NC5=CC(C6CC6)=NN5C)=NC(C)=N3)C4=C1 | ||
| Formula | C24H25N7O2 | M.Wt | 443.5 |
| Solubility | DMSO : 110 mg/mL (248.03 mM) | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.2548 mL | 11.274 mL | 22.5479 mL |
| 5 mM | 0.451 mL | 2.2548 mL | 4.5096 mL |
| 10 mM | 0.2255 mL | 1.1274 mL | 2.2548 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 7 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *