CHMFL-BMX-078 (CHMFL-BMX 078) (Synonyms: CHMFL-BMX 078) |
| Catalog No.GC33020 |
CHMFL-BMX-078 (CHMFL-BMX 078) is a highly potent and selective type II irreversible BMX kinase inhibitor with an IC50 of 11 nM.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1808288-51-8
Sample solution is provided at 25 µL, 10mM.
;)
_1-7.$$$37316672@70.jpg');)
;)
;)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
;)
;)
;)
_1124-1138.$$$35908550@30.jpg');)
_766-780.$$$37100057@30.jpg');)
_418-432.$$$36893736@30.jpg');)
_240-255.$$$35108512@29.jpg');)
_533-545.$$$36543525@28.jpg');)
_264-276.$$$36600053@22.jpg');)
_2214998.$$$@0.jpg');)
CHMFL-BMX-078 is a highly potent and selective type II irreversible BMX kinase inhibitor with an IC50 of 11 nM.
Bone marrow kinase in the X chromosome (BMX, also called ETK) is a nonreceptor tyrosine kinase involved in tumorigenicity, cell motility, adhesion, angiogenesis, proliferation, and differentiation. CHMFL-BMX-078 exhibits an IC50 of 11 nM by formation of a covalent bond with cysteine 496 residue in the DFG-out inactive conformation of BMX. It displays a high selectivity profile against the 468 kinases/mutants in the KINOMEscan evaluation and achieves at least 40-fold selectivity over BTK kinase (IC50=437 nM). For inactive state of BMX kinase, CHMFL-BMX-078 displays a binding Kd of 81 nM, while for the active state of BMX kinase, it exhibits a binding Kd of 10200 nM. CHMFL-BMX-078 exhibits antiproliferative effects against BaF3-TEL-BMX cells (GI50=0.016 μM) and selectivity over parental BaF3 cells. CHMFL-BMX-078 is about 80-fold more potent against BMX wt (EC50=5.8 nM) than C496S mutant (EC50=459 nM) for the inhibition of BMX total tyrosine phosphorylation. CHMFL-BMX-078 would serve as a useful pharmacological tool to elucidate the detailed mechanism of BMX mediated signaling pathways[1].
CHMFL-BMX-078 exhibits a short half-life (T1/2=0.80 h) in iv injection. CHMFL-BMX-078 also displays an acceptable Cmax (13565.23 ng/mL) and AUC0-t (1386.41 ng/mL h) in iv injection. However, it is not absorbed by oral administration, indicating that this compound could be administrated through iv or ip injection when used as a research tool[1].
[1]. Liang X, et al. Discovery of 2-((3-Acrylamido-4-methylphenyl)amino)-N-(2-methyl-5-(3,4,5-trimethoxybenzamido)phenyl)-4-(methylamino)pyrimidine-5-carboxamide (CHMFL-BMX-078) as a Highly Potent and Selective Type II Irreversible Bone Marrow Kinase in the X Chromosome (BMX) Kinase Inhibitor. J Med Chem. 2017 Mar 9;60(5):1793-1816.
Kinase experiment: | The kinase reaction system contains BMX or BTK, 1 μL of serially diluted CHMFL-BMX-078, and substrate Poly peptidewith 100 μM ATP. The reaction in each tube is started immediately by adding ATP and kept going for an hour under 37 °C. After the tube cooled for 5 min at room temperature, 5 μL solvent reactions are carried out in a 384-well plate. Then 5 μL of ADP-Glo reagent is added into each well to stop the reaction and consume the remaining ATP within 40 min. At the end, 10 μL of kinase detection reagent is added into the well and incubated for 30 min to produce a luminescence signal. Luminescence signal is measured with an automated plate reader[1]. |
Animal experiment: | Rats: Six 8-week-old male Sprague−Dawley rats are fasted overnight before starting drug treatment via intravenous and oral administration. Animal blood collection time points are as follows. For groups 1, 3, and 5 (intravenous): 1 min, 5 min, 15 min, 30 min, 1 h, 2 h, 4 h, 6 h, and 8 h before and after administration is selected. For group 2, 4, and 6 (oral): 5 min, 15 min, 30 min, 1 h, 2 h, 4 h, 6 h, 8 h, and 24 h before and after dosing. The plasma is collected for analysis[1]. |
References: [1]. Liang X, et al. Discovery of 2-((3-Acrylamido-4-methylphenyl)amino)-N-(2-methyl-5-(3,4,5-trimethoxybenzamido)phenyl)-4-(methylamino)pyrimidine-5-carboxamide (CHMFL-BMX-078) as a Highly Potent and Selective Type II Irreversible Bone Marrow Kinase in the X Chromosome (BMX) Kinase Inhibitor. J Med Chem. 2017 Mar 9;60(5):1793-1816. | |
| Cas No. | 1808288-51-8 | SDF | |
| Synonyms | CHMFL-BMX 078 | ||
| Canonical SMILES | O=C(C1=CN=C(NC2=CC=C(C)C(NC(C=C)=O)=C2)N=C1NC)NC3=CC(NC(C4=CC(OC)=C(OC)C(OC)=C4)=O)=CC=C3C | ||
| Formula | C33H35N7O6 | M.Wt | 625.67 |
| Solubility | DMSO : ≥ 30 mg/mL (47.95 mM) | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 1.5983 mL | 7.9914 mL | 15.9829 mL |
| 5 mM | 0.3197 mL | 1.5983 mL | 3.1966 mL |
| 10 mM | 0.1598 mL | 0.7991 mL | 1.5983 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 23 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *