U89232 |
|
Catalog No.GC32660
|
U-89232 appears to be a cardioselective KATP channel opener.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 134017-78-0
Sample solution is provided at 25 µL, 10mM.
U-89232 appears to be a cardioselective KATP channel opener.
U-89232, a derivative of the ATP-sensitive potassium (KATP) channel opener Cromakalim. Experiments are performed in open-chest pigs subjected to a 60-min occlusion of the left anterior descending coronary artery (LADCA) and to 2 h of reperfusion. Four groups of animals are studied (n=6 each). Animals receive either U-89232, 3 mg/kg i.v. over a 15-min period (U), or Glibenclamide, a selective KATP channel blocker, 1 mg/kg i.v. over a 15-min period (GLI) before the LADCA occlusion. In the GLI+U group, first Glibenclamide (1 mg/kg/15 min) and then U-89232 (3 mg/kg/15 min) are infused before the 60 min of ischemia. Saline-treated animals serve as controls (CON). Hemodynamic parameters are continuously monitored. Regional contractile wall function is quantified with ultrasonic crystals aligned to measure wall thickening. At the end of the protocol, infarct size (IS, as percentage of risk region) is determined by incubating the myocardium with p-nitrobluetetrazolium. With comparable myocardium at risk, infusion of U-89232 before 60 min of LADCA occlusion significantly reduces infarct size (IS, 18.5±3.7%; p<0.001 vs. 63.2±3.3% for the controls), whereas glibenclamide has no effect on infarct size (IS, 69.5±4.4%). The administration of glibenclamide before U-89232 infusion blocks the infarct size-reducing effect of U-89232. At least in a pig model, U-89232 appears to be a cardioselective KATP channel opener, because in the absence of hemodynamic alterations, it exhibits a profound cardioprotective effect, which is fully reversible by blocking KATP channels[1].
[1]. Rohmann S, et al. In swine myocardium, the infarct size reduction induced by U-89232 is glibenclamide sensitive: evidence that U-89232 is a cardioselective opener of ATP-sensitive potassium channels. J Cardiovasc Pharmacol. 1997 Jan;29(1):69-74.
| Cas No. | 134017-78-0 | SDF | |
| Canonical SMILES | CCC(C)(C)N/C(NC#N)=N\[C@H]1C2=CC(C#N)=CC=C2OC(C)(C)[C@@H]1O | ||
| Formula | C19H25N5O2 | M.Wt | 355.43 |
| Solubility | Soluble in DMSO | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.8135 mL | 14.0675 mL | 28.1349 mL |
| 5 mM | 562.7 μL | 2.8135 mL | 5.627 mL |
| 10 mM | 281.3 μL | 1.4067 mL | 2.8135 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 40 reference(s) in Google Scholar.)















