Terbogrel (BIBV 308SE) |
|
Catalog No.GC32550
|
Terbogrel (BIBV 308SE) is an orally available thromboxane A2 receptor antagonist and a thromboxane A2 synthase inhibitor, with both IC50s of about 10 nM.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 149979-74-8
Sample solution is provided at 25 µL, 10mM.
Terbogrel is an orally available thromboxane A2 receptor antagonist and a thromboxane A2 synthase inhibitor, with both IC50s of about 10 nM.
Pretreatment of platelets with terbogrel 1 μM completely inhibits thrombin-induced thromboxane A2 formation (2±1 ng/mL) but does not result in any inhibition of platelet aggregation. Terbogrel (1 μM) completely inhibits U46619-induced platelet aggregation, and the IC50 value is 10 nM. Terbogrel inhibits both platelet aggregation and thromboxane A2 formation with an IC50 of about 10 nM[1]. Terbogrel inhibits the thromboxane A2 synthase in human gel-filtered platelets with an IC50 value of 4.0 ± 0.5 nM. Terbogrel blocks the thromboxane A2/endoperoxide receptor on washed human platelets with an IC50 of 11 ± 6 nM (n = 2) and with an IC50 of 38 ± 1 nM (n = 15) in platelet-rich plasma. Terbogrel inhibits the collagen-induced platelet aggregation in human platelet-rich plasma and whole blood with an IC50 of 310 ± 18 nM (n = 8) and 52 ± 20 nM (n = 6), respectively[2].
Terbogrel (0.1-3.0 mg/kg) demonstrates an impressive antithrombotic efficacy in rabbits. Terbogrel (10 mg/kg, po) is rapidly and well (90%) absorbed with a systemic availability of about 30% in rats[2].
[1]. Muck S, et al. Effects of terbogrel on platelet function and prostaglandin endoperoxide transfer. Eur J Pharmacol. 1998 Feb 26;344(1):45-8. [2]. Soyka R, et al. Guanidine derivatives as combined thromboxane A2 receptor antagonists and synthase inhibitors. J Med Chem. 1999 Apr 8;42(7):1235-49.
| Cas No. | 149979-74-8 | SDF | |
| Canonical SMILES | O=C(O)CCC/C=C(C1=CC=CC(/N=C(NC#N)/NC(C)(C)C)=C1)/C2=CC=CN=C2 | ||
| Formula | C23H27N5O2 | M.Wt | 405.49 |
| Solubility | Soluble in DMSO | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.4662 mL | 12.3308 mL | 24.6615 mL |
| 5 mM | 493.2 μL | 2.4662 mL | 4.9323 mL |
| 10 mM | 246.6 μL | 1.2331 mL | 2.4662 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 1 reference(s) in Google Scholar.)















