dBET1 |
| Catalog No.GC19119 |
dBET1 is a potent BRD4 protein degrader based on PROTAC technology with an EC50 of 430 nM.
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 1799711-21-9
Sample solution is provided at 25 µL, 10mM.
;)
_1-7.$$$37316672@70.jpg');)
;)
;)
_273-287.$$$36806353@46.jpg');)
_1-16.$$$37156877@44.jpg');)
;)
;)
;)
_1124-1138.$$$35908550@30.jpg');)
_766-780.$$$37100057@30.jpg');)
_418-432.$$$36893736@30.jpg');)
_240-255.$$$35108512@29.jpg');)
_533-545.$$$36543525@28.jpg');)
_264-276.$$$36600053@22.jpg');)
_2214998.$$$@0.jpg');)
dBET1 is a potent BRD4 protein degrader based on PROTAC technology with an EC50 of 430 nM.
Treatment with dBET1 down regulates MYC and PIM1 transcription. Degradation of BRD4 by dBET1 is associated with a more potent apoptotic consequence in MV4;11 cell line. Significantly increased apoptosis after only 4 h of dBET1 treatment is enhanced at 8 h. dBET1 also induces a potent and superior inhibitory effect on MV4;11 cell proliferation at 24 hours (measured by ATP content, IC50= 0.14 uM, compare to IC50= 1.1 uM with JQ1)[1].
Administration of dBET1 attenuates tumor progression as determined by serial volumetric measurement, and decreases tumor weight assessed post-mortem. Acute pharmacodynamic degradation of BRD4 is observed four hours after a first or second daily treatment with dBET1 (50 mg/kg IP). A statistically significant destabilization of BRD4, down regulation of MYC and inhibition of proliferation is observed with dBET1 compare to vehicle control in excised tumors. Two weeks of dBET1 is well tolerated by mice without a meaningful effect on weight, white blood count, hematocrit or platelet count[1].
References:
[1]. Winter GE, et al. DRUG DEVELOPMENT. Phthalimide conjugation as a strategy for in vivo target protein degradation. Science. 2015 Jun 19;348(6241):1376-81.
| Cas No. | 1799711-21-9 | SDF | |
| Canonical SMILES | O=C(NCCCCNC(COC1=CC=CC(C(N2C(CC3)C(NC3=O)=O)=O)=C1C2=O)=O)C[C@H]4C5=NN=C(C)N5C6=C(C(C)=C(C)S6)C(C7=CC=C(Cl)C=C7)=N4 | ||
| Formula | C38H37ClN8O7S | M.Wt | 785.27 |
| Solubility | DMSO : ≥ 50 mg/mL (63.67 mM);Water : < 0.1 mg/mL (insoluble) | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 1.2734 mL | 6.3672 mL | 12.7345 mL |
| 5 mM | 0.2547 mL | 1.2734 mL | 2.5469 mL |
| 10 mM | 0.1273 mL | 0.6367 mL | 1.2734 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
g
μL
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 2 reference(s) in Google Scholar.)
GLPBIO products are for RESEARCH USE ONLY. Please make sure your review or question is research based.
Required fields are marked with *