Vilanterol (Synonyms: GSK-642444, GW 642444) |
|
Catalog No.GC13747
|
β2-AR agonist
Products are for research use only. Not for human use. We do not sell to patients.
Cas No.: 503068-34-6
Sample solution is provided at 25 µL, 10mM.
Vilanterol is a novel and selective agonist of β2-AR with a PEC50 value of 10.37±0.05 [1].
Vilanterol is a novel long-acting β2-AR agonist (LABA) with 24h activity in development for inhaled once daily treatment. In the radioligand binding studies, Vilanterol has shown the binding affinity in the one-affinity site model with pKD values of 9.44±0.07 and 10.82±0.12 in the presence Gpp(NH)p and absence Gpp(NH)p, respectively. In dissociation studies, Vilanterol has been reported to bind from the β2-AR with a dissociation t1/2 value of 3.5 min in the presence of Gpp(NH)p. Vilanterol has been found to have a good selectivity for β2-AR over the other β-AR receptor subtypes(β1and β3) with pEC50 values of 10.37±0.05, 6.98±0.03 and 7.36±0.03, respectively. Vilanterol has exhibited at least 1000-fold selectivity over both β1-and β3-AR subtypes [1].
References:
[1] Slack RJ1, Barrett VJ, Morrison VS, Sturton RG, Emmons AJ, Ford AJ, Knowles RG.In vitro pharmacological characterization of vilanterol, a novel long-acting β2-adrenoceptor agonist with 24-hour duration of action.J Pharmacol Exp Ther. 2013 Jan; 344(1):218-30.
Kinase experiment: | Saturation, association, and dissociation binding studies are performed for [3H]Vilanterol to determine receptor binding kinetics at the β2-AR (equilibrium dissociation constant (KD), total number of receptors (Bmax), association rate (kon), and dissociation rate (koff) are calculated). For saturation binding, membranes (in a volume of 1.4 mL to avoid ligand depletion) are incubated with increasing concentrations of [3H]Vilanterol (~0.01-1.3 nM) for 5 h before filtration. For association binding, membranes are incubated with different concentrations of [3H]Vilanterol (~0.1-1.9 nM) for varying incubation times up to 1 h before filtration. For dissociation binding, membranes are preincubated for 1 h with a fixed concentration of [3H]Vilanterol (~1.1 nM) before dissociation is initiated by a 1:20 dilution in binding buffer (containing 10 μM cold Vilanterol) and then incubated for varying times up to 8 h before filtration. Saturation binding is also completed for [3H]CGP12177 (increasing concentrations of ~0.01-2.8 nM) in the same format as described above for [3H]Vilanterol. To determine the affinity of β2-AR agonists and antagonists, competition binding displacement studies are completed in which membranes are incubated with a fixed concentration of [3H]Vilanterol (~0.2 nM) and increasing concentrations of unlabeled agonist/antagonist for 5 h before filtration. All competition binding displacement studies are completed in the presence of 100 µM Gpp(NH)p to ensure that binding curves are monophasic[1]. |
References: [1]. Slack RJ, et al. In vitro pharmacological characterization of vilanterol, a novel long-acting β2-adrenoceptor agonist with 24-hour duration of action. J Pharmacol Exp Ther. 2013 Jan;344(1):218-30 | |
| Cas No. | 503068-34-6 | SDF | |
| Synonyms | GSK-642444, GW 642444 | ||
| Chemical Name | 4-[(1R)-2-[6-[2-[(2,6-dichlorophenyl)methoxy]ethoxy]hexylamino]-1-hydroxyethyl]-2-(hydroxymethyl)phenol | ||
| Canonical SMILES | C1=CC(=C(C(=C1)Cl)COCCOCCCCCCNCC(C2=CC(=C(C=C2)O)CO)O)Cl | ||
| Formula | C24H33Cl2NO5 | M.Wt | 486.43 |
| Solubility | DMF: 30 mg/ml,DMSO: 10 mg/ml,Ethanol: 30 mg/ml | Storage | Store at -20°C |
| General tips | Please select the appropriate solvent to prepare the stock solution according to the
solubility of the product in different solvents; once the solution is prepared, please store it in
separate packages to avoid product failure caused by repeated freezing and thawing.Storage method
and period of the stock solution: When stored at -80°C, please use it within 6 months; when stored
at -20°C, please use it within 1 month. To increase solubility, heat the tube to 37°C and then oscillate in an ultrasonic bath for some time. |
||
| Shipping Condition | Evaluation sample solution: shipped with blue ice. All other sizes available: with RT, or with Blue Ice upon request. | ||
| Prepare stock solution | |||
|
1 mg | 5 mg | 10 mg |
| 1 mM | 2.0558 mL | 10.279 mL | 20.5579 mL |
| 5 mM | 411.2 μL | 2.0558 mL | 4.1116 mL |
| 10 mM | 205.6 μL | 1.0279 mL | 2.0558 mL |
Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)
Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)
Calculation results:
Working concentration: mg/ml;
Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )
Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL saline, mix and clarify.
Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.
Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.
3. All of the above co-solvents are available for purchase on the GlpBio website.
Quality Control & SDS
- View current batch:
- Purity: >98.00% Appearance: A solid
- COA (Certificate of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Average Rating: 5 (Based on Reviews and 17 reference(s) in Google Scholar.)















